K800i Firmware Upgrade...

[rsparrow]

Okay, so my current Firmware Information is this

R1JC002
prgCXC1250212_ORANGE_WI R1JC002

EROM: R3A022
prgCXC1250616_EROM_DB2020_HB106GENERIC_FOTA_SIMLOC K_FLAFLA_SIBLEY_SEMCUSB

LCD SW versions
Main display
Current 200610121

Camera SW versions
Camera
Current: 2.5
Video call Camera
Current: 2.3

ITP SW version
CXC 125 0310 R2N

Customization
CDA102511/47 R20A
cxc1250490 R1JC002
ORANGE_GEN
Memory Stick: No file found

Content version
PA29
Memory Stick: No file found

Java SW version
JP-7.3

Text revision:
BT

Update service SW
UA version:
CRH1069179 R3B021
2006-10-12 08:47

-------------------------
Okay, that may not been nothing to you, or me....
but I just want to know what firmware I should upgrade to, if I need to... How I should do it, if there's anything else I need to do, because it's on Orange... ect; ect; Thanks Alot!

[TheRascal]

Read this & this :)
Or everything here.

[jjjggj]

You should flash your phone using the last release of XS++ (3.1) because it's more stable, easier and faster than SETool2 Lite. Moreover, it has always been a step ahead...

For your phone, the K800i, the latest firmware revision is R8BA024.

If you just want to update your phone, launch SEUS. Contrary to that, whether you wanna also debrand your K800i, you'll have to flash your phone with one of the software listed on the top.

Bye. :D

[debeliz]

updating with SEUS will not give him the latest firmware

[Yodafone]

It will give him the latest firmware sent out by his operator (Orange) though.

[ts013]

You should flash your phone using the last release of XS++ (3.1) because it's more stable, easier and faster than SETool2 Lite. Moreover, it has always been a step ahead...

For your phone, the K800i, the latest firmware revision is R8BA024.

If you just want to update your phone, launch SEUS. Contrary to that, whether you wanna also debrand your K800i, you'll have to flash your phone with one of the software listed on the top.

Bye. :D

XS++ is neither more stable nor faster than SET lite.
SET lite is the litte brother of SE Tool 3. The_laser released it when free flashing soft appeared to advertise SET3.
One step ahead? Have you seen DB2020 patching in XS++ yet? :p
The_laser used to release new taks in SET lite whenever someone released a free soft that supports tasks that were only available on SET3 before (for example DB2020 support, or the DB2020 patching lately).
The big advantage of XS++ is the new FSX mode since v3 and the easy handling. It's much easier for beginners to understand.