Gdfs

[Heshamborhan]

i flashed my phone using a wrong firmware, now my phone is dead. i don't have backup the GDFS file.
Can anyone upload gdfs file for w550 r4cb020 for me..:(
I have download the gdfs file for w550 from this site, but the gdfs is R4AB048.
thanks...:(

[mohdumer]

WARNING:
GDFS Is Unique To Your IMEI. A GDFS From Another Handset, Even Same Model And Firmware Will Damage Your Handset And Your Phone Will Be Incurable. Since You Dont Have A Backup, So You Need To Re-Create Your GDFS.

[ts013]

First flash the correct firmware to your phone. Where do you know from your GDFS is dead?
Please post a log of SE Tool or XS++.

[Heshamborhan]

First flash the correct firmware to your phone. Where do you know from your GDFS is dead?
Please post a log of SE Tool or XS++.

i flash my phone using Phone-XS..

02:01:28| Phone-XS GUI Build V2.10 Alpha Ready!
02:01:28| System Diagnostics check: OK!
02:01:32| Attempting to open the interface...
02:01:32| ++++++++++++++++++++++++++++++++++
02:01:32| Turn off phone
02:01:32| Hold C Button on phone and connect phone.
02:01:32| You have 30 seconds.
02:01:32| ++++++++++++++++++++++++++++++++++
02:01:39| PORT STATUS: ACTIVE
02:01:39| DBID: 8040 (db2010 Marita compact)
02:01:39| proto: 3.1
02:01:39| sending loaders\db2010_cid00_prodid_p3k.bin
02:01:39| QH00 Header
02:01:39| Wait for EsB
02:01:39| Wait for EhM
02:01:39| QA00 Prologue 6532 bytes
02:01:39| Wait for EaTEbS
02:01:39| QD00 Payload 35540 bytes
02:01:39| Wait for EdQ
02:01:39| This is a PRODUCTION_ID loader
02:01:39| Activating GDFS...
02:01:39| Cannot open GDFS
02:01:39| Activating GDFS...
02:01:39| Cannot open GDFS
02:01:39| Activating GDFS...
02:01:39| Cannot open GDFS
02:01:39| Activating GDFS...
02:01:39| Cannot open GDFS
02:01:39| Activating GDFS...
02:01:39| Cannot open GDFS
02:01:39| Warning: IMEI name does not match GDFS name (IMEI:W550 GDFS:n/a)
02:01:39| ...using IMEI name
02:01:39| ++++++++++++++++++++++++++++++++++
02:01:39| PHONE INFO
02:01:39| ++++++++++++++++++++++++++++++++++
02:01:39| DBID: db2010
02:01:39| OPT CID: 49
02:01:39| EROM CID: 49
02:01:39| EROM color: red
02:01:39| IMEI: 35744300xxxxxx
02:01:39| Phone: W550
02:01:39| Operator: n/a
02:01:39| CDA: n/a n/a
02:01:39| Firmware: n/a
02:01:39| EROM: n/a
02:01:39| ++++++++++++++++++++++++++++++++++
02:01:39| ready for operation!

please tell me, what i need to do now.:confused:

[ts013]

That looks more like a problem with your MAIN. Use SE Tool lite and do a full reflash (MAIN, FS, Custpack).

[xechan]

guide: Step by step instructions for flashing a phone using only XS++
XS++ 3.1 Guide-Flashing,Customizing,Recovering - Top Sony Forums
i use this one with k750i,& i don't know it works with w550i or not...

[Heshamborhan]

That looks more like a problem with your MAIN. Use SE Tool lite and do a full reflash (MAIN, FS, Custpack).

i just done a full flash, but when i switch the phone onn, it stuck at "please wait.." menu. I wait it for a hours, but nothing happen.
anything wrongs with this log..:confused:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit www.setool.net and buy FULL.

FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
CDA:CDA102415/40
MODEL:W550i
VARIANT:APAC_1
LANGUAGE: EN
LANGUAGE: MS
LANGUAGE: ID
LANGUAGE: TL
LANGUAGE: VI
LANGUAGE: ZS
ChipID:8040,EMP protocol:0301

OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35744300212513 CERT:RED
LDR:051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
Flash ID check:890D
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"


OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:890D
Flash props sent ok
FOUND: R4CB020_CXC1250086_CHINA_EL
Restore from:R4CB020_CXC1250086_CHINA_EL
can't open file "C:\SONY ERICSSON\[SONY Ericsson]\[[SETOOL]]\setool2lite_db2020\rest\R4CB020_CXC1250086_CHINA_ EL"
writing C:\SONY ERICSSON\[SONY Ericsson]\[[FIRMWARE]]\W550_R4CB020_MAIN_CHINA_APAC1_THAI.bin
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:369
Will flash 369 blocks...
SSW loading returns:0
writing C:\SONY ERICSSON\[SONY Ericsson]\[[FIRMWARE]]\W550_R4CB020_FS_CHINA.bin
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:261
Will flash 261 blocks...
SSW loading returns:0
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
loader filesystem startup: executed
loader GDFS startup: executed
Writing package...
Directory: tpa/preset/custom/
CONTENT_DOWNLOAD_HOOK.itm (2048)
customize.xml (3326)
FM_PICTURES_HOOK_3.itm (10240)
FM_SOUNDS_HOOK_3.itm (10240)
FM_THEMES_HOOK_3.itm (10240)
FM_VIDEOS_HOOK_3.itm (10240)
GAMES_HOOK_3.itm (10240)
SETT_RINGTONE_HOOK_3.itm (10240)
Phone detached
Elapsed:719 secs.

[ts013]

The custpack you used does not match the FS.
You have to use an APAC FS if you want to use the APAC1 custpack.
Or you use a China Custpack if you wan to use the China FS.

[ali_power42]

after flashing with wrong firmware (of another phone model) your phone will be dead
so if it is not corrected with flashig main & fs & custom, you should format and write a new gdfs with setool box(only box can repaire it not xs or setool2 lite or...) because new gdfs is for another phone and they have different imei
only box can change imei not softwares

[sweetdix]

ya, I have a setool box, I have some problem, but it is about k510 cid 50 red, only please wait that I get after flash, what seems to be problem?