Results 1 to 10 of 56

Hybrid View

se-tuning How to apply patches with... 01-02-2008, 05:35 AM
opu_bu is it works with W610i? Can i... 01-02-2008, 08:40 AM
se-tuning If you have a patch that... 01-02-2008, 08:55 AM
zakagadir i dwnload it now after tried... 01-02-2008, 09:31 AM
marnraay Yes It's work confirm. I... 01-02-2008, 11:50 AM
opu_bu Where can i find this patch??? 01-02-2008, 01:47 PM
Evgenik ;W610 SW-R6BC002 ;Radio... 01-02-2008, 01:57 PM
ts014 attached quick_access patch... 01-02-2008, 02:01 PM
bare handz how do i get main (.mbn)... 01-19-2008, 04:50 PM
a123456789 is it works with Z550a? 01-31-2008, 06:09 PM
gollapudis is it works with W580i? Can i... 02-13-2008, 03:44 PM
opu_bu How to for W610_R8BA024?? ... 01-02-2008, 02:38 PM
xulos i put mbn in qamaker exe and... 01-02-2008, 01:29 PM
se-tuning What firmware do you have? 01-02-2008, 01:30 PM
xulos i succesfully worked this one... 01-02-2008, 02:02 PM
opu_bu attached quick_access patch... 01-02-2008, 02:09 PM
marnraay ;W610 SW-R8BA024 ;Радио без... 01-02-2008, 03:06 PM
opu_bu But Russian language is not... 01-02-2008, 03:18 PM
marnraay Don't worry about that The... 01-02-2008, 03:31 PM
se-tuning Every line that begins with a... 01-02-2008, 03:57 PM
PoIsson thanks number one,but I have... 01-02-2008, 04:49 PM
opu_bu When i apply vkp file, my... 01-02-2008, 05:03 PM
GinnCorvus No error in log... what's the... 01-02-2008, 07:55 PM
se-tuning WSOD (white screen of death)... 01-02-2008, 08:29 PM
zakagadir 4shared.com - online file... 01-02-2008, 10:31 PM
elkirf very good post. can i get for... 01-06-2008, 12:01 PM
o0ops OK my K800i has R1CE001, I... 01-06-2008, 08:39 PM
silkhannaz i try this but nothing... 01-07-2008, 11:02 AM
khli2001 can anyone help me becauce... 01-07-2008, 11:37 AM
GinnCorvus Turn off the phone, remove... 01-07-2008, 12:39 PM
khli2001 i have done all that but it... 01-07-2008, 12:46 PM
khawar Dear, you must have some... 01-07-2008, 04:41 PM
khli2001 but i am working fine with... 01-07-2008, 08:54 PM
endz i think u should reinstall... 01-21-2008, 12:12 PM
rtmsz25 wrong post sry. 01-07-2008, 01:23 PM
Pinkiz seTool using guide made by me... 01-07-2008, 03:09 PM
celia-it Can anyone help me on... 01-14-2008, 09:48 PM
miguel8935 yeah you can!! but for me is... 01-19-2008, 02:58 AM
V77 Hi to everybody! Sorry... 01-19-2008, 10:23 AM
silkhannaz my phone is dead (cannot on)... 01-22-2008, 09:08 AM
opu_bu You have to add your main... 01-22-2008, 10:20 AM
marnraay @silkhannaz just reflash... 01-22-2008, 09:31 AM
silkhannaz i do it 4 times flash my main... 01-22-2008, 09:37 AM
silkhannaz i will try again... hope this... 01-22-2008, 10:29 AM
mohdumer You'll Have To Drag Your Main... 01-22-2008, 02:44 PM
skylinks can i flash .fbn or .bin file... 01-23-2008, 09:24 AM
gll5dm I don't understand this part.... 01-24-2008, 11:07 AM
opu_bu Here is the detail procedure... 01-26-2008, 12:46 PM
___m0d_ well. i tried to write my... 01-31-2008, 11:14 AM
vlax @a123456789 Z550a doesnt... 02-07-2008, 12:30 PM
Pinkiz here is setool patching guide... 02-07-2008, 01:42 PM
Rooney43 REMEMBER! That method is for... 02-16-2008, 07:12 PM
mohdumer Patches For All DB2020 CID52... 02-16-2008, 08:06 PM
vivek_bye i dont get that "MAIN file... 02-20-2008, 02:20 PM
  1. #1
    Advanced user opu_bu's Avatar
    Join Date
    Jul 2007
    Device
    W610i
    Posts
    127
    Thanks
    11
    Thanked 44 Times in 34 Posts
    When i apply vkp file, my W610 turned to dead....
    What is the reason??

    here is the log:
    Welcome to SEtool2 ( LITE edition ) v 1.11
    supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
    Loaded 51 flash descriptors

    if you like LITE edition - please visit Index of ./ and buy FULL.

    ChipID:9900,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:52
    Speed:921600
    OTP LOCKED:1 CID:51 PAF:1 IMEI:35489401480239 CERT:RED
    FLASH CID:52 COLOR:RED
    LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
    Flash ID check:897E
    Flash props sent ok

    CID52 BYPASS PROCEDURE STARTED
    Processing part1...
    CSloader version:
    070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
    Processing part2...
    Processing part3....
    OTP LOCKED:1 CID:51 PAF:1 IMEI:35489401480239 CERT:RED
    FLASH CID:52 COLOR:RED
    LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
    Flash ID check:897E
    Flash props sent ok

    REMOVE CABLE FROM PHONE
    REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
    THEN PRESS "READY"

    HOLD "C" BUTTON AND ATTACH PHONE

    CID52 BYPASS PROCEDURE FINISHED

    ChipID:9900,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:52
    Speed:921600
    Trying to launch embedded bootloader...
    INT LDR:DB2020_PRELOADER_FOR_SETOOL2
    LDR:DB2020 LOADER FOR SETOOL2
    Flash ID check:897E
    Flash props sent ok
    Going to execute VKP script....
    Starting to process VKP patch script: C:\Documents and Settings\Azimul Kabir Apu\My Documents\Downloads\Compressed\setool2lite1.11www. se-tuning.net\qamaker\patch.vkp
    VKP script loaded OK. Lines: 5
    Patch structure created OK. Determining blocks to read...
    New block #0000 added: $45100000
    Blocks selected OK. Reading blocks: 1
    Blocks readed to memory OK. Checking contents...
    Blocks patched OK. Start writing...
    Block 0 written
    VKP script executed OK
    Elapsed:469 secs.
    What should i do now?

    It was the problem of my process..
    Now it's ok. I've successfully patched my phone.
    Last edited by opu_bu; 01-03-2008 at 02:34 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •