How to apply patches with SETool2 Lite V1.11

**se-tuning** · 01-02-2008

Every line that begins with a ";" is a comment and doesn't count. That line can be removed :P.

**PoIsson** · 01-02-2008

thanks number one,but I have a problem with it.It can't fiind any radio post when I pull the headsets off but still workin.

**opu_bu** · 01-02-2008

When i apply vkp file, my W610 turned to dead....
What is the reason??

here is the log:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35489401480239 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:35489401480239 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\Azimul Kabir Apu\My Documents\Downloads\Compressed\setool2lite1.11www. se-tuning.net\qamaker\patch.vkp
VKP script loaded OK. Lines: 5
Patch structure created OK. Determining blocks to read...
New block #0000 added: $45100000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:469 secs.

What should i do now?

It was the problem of my process..
Now it's ok. I've successfully patched my phone.

**GinnCorvus** · 01-02-2008

No error in log... what's the problem of the phone?

**se-tuning** · 01-02-2008

WSOD (white screen of death) ? Try updating EROM via WOTAN (it's free).

**zakagadir** · 01-02-2008

**elkirf** · 01-06-2008

very good post. can i get for w810 R4ce12

**o0ops** · 01-06-2008

OK my K800i has R1CE001, I guess I should flash FirmWare and FileSystem to more recent version, maybe convert it to K810i before unlocking, right?

Thanks a lot.

**silkhannaz** · 01-07-2008

Originally Posted by se-tuning

Download SETool 2 Lite V1.11 From here: RapidShare: 1-Click Webhosting

You must do this one time! After that you will skip all this process!!!
1. Drag the MAIN file (.mbn) that you have in your phone on to qamaker.exe From the qamaker folder that comes whith SETool2 Lite 1.11; this will create a vkp file;
2. The vkp file created in step 1 put it in to MISC FILES;
3. Click bypass db2020;
4. Add the main FW (.mbn) file (like you would like to flash it);
5. Press FLASH button;
6. Follow the instructions given by setool2 lite. Be carrefull! At one moment you will belive that nothing happens and the status windows is not changing! Not remove the CABLE! Wait until "ELAPSED x SECONDS" appears in status window.

This process will take some time, about 10-15 minutes or more

After this process, follow this steps for every patch with the condition to check "Use "quick access" patch": SE-Tuning View topic - How to apply patches with SETool 2 Lite

i try this but nothing happen..
when i try patch my phone dead man..
now i reflash my damn phone again..

**khli2001** · 01-07-2008

can anyone help me becauce when i connect my phone with the usb cable
my phone turns on i have press c and then connect to the pc
but it still turns on i have install the USBFlash driver but it still not working

Thread: How to apply patches with SETool2 Lite V1.11

Thread Tools

Display

Hybrid View

The Following User Says Thank You to zakagadir For This Useful Post:

Thread Information

Users Browsing this Thread

Tags for this Thread

Posting Permissions