Phone Dead? Here's How To Revive It!!

[beto_nl]

For all the newbies like me with no patience, doing all kind of things too fast and too unpreapared and eventually KILLING THE PHONE , after using all kind of programs and customizing, here is how I revived my W800 a couple of times using the SEtool2 lite (great little tool), even without having any backups:

1) Open SEtool2 lite
2) Choose your phone model
3) Then press "FLASH" button, follow instructions, disconnect and..voilá! phone is revived and what's better:
Any customizing you tried to do before (cause of death), for instance: transforming your K750 to w800 or removing sound file from file system directory using XS++ .......will work!!

Note:
-I didn't add any (rest)file before pressing flash, SEtool detects and uses the rest file by itself
( at least in my case) otherwise you should look for the right rest file.
- It worked on my W800 cid49 red (K750) all patched, I hope it will work for you!!!

- Flashing, customizing, patching is never without risks so dont do like me. Just read as many tutorials as possible before trying all kind of things!!!

Good luck and pls tell me if this was usefull!!
Beto_nl

[soumya_dig]

What about the db2020 platform???? If they are dead how to retrieve them????

[seking]

the unlock/repair function is disabled. So how could anybody use this function? see here SETool2 Lite - SE-NSE Forums

[ts013]

Well, all you do is reflashing the firmware. But you didn't even tell the user that he has to put the matching firmware files and the custpack before pressing "Flash" ;)

[keetoon]

How to get firmware??? and how to download it???

[beto_nl]

Well I didnt tell to put matching firmware files and custpack or any other file before pressing "flash", because I never did put them!!:p:p

I didn't add any (rest)file before pressing flash, SEtool detects and uses the rest file by itself (at least in my case) otherwise you should look for the right rest file.
it did work like that worked on my W800 cid49 red (K750)

Well, all you do is reflashing the firmware. But you didn't even tell the user that he has to put the matching firmware files and the custpack before pressing "Flash" ;)

[Taurus3]

before flashing think twice, try to do master setting in ur phone, most of the problems might solve, it is a factory resettig, u feel u bougt now from showroom after master resettig, but your settings will be removed in the process and this is safe.

[beto_nl]

This is not about flashing or master reset, it's just a tip for beginners to revive a dead phone... if it's dead you cant start it nevertheless RESET it duh

before flashing think twice, try to do master setting in ur phone, most of the problems might solve, it is a factory resettig, u feel u bougt now from showroom after master resettig, but your settings will be removed in the process and this is safe.

[ombladon]

lol...if ur phone dies just reflash with xs++....it solved my problem :D (i did master reset and killed my phone:)) so i had to reflash)
Good Day.

[Heshamborhan]

i already done all this step, but my phone is still dead. i think, ihis is because my gdfs is damage.
so... how to revive my dead phone if gdfs file is damage.
dont ask me to restore the gdfs, coz i don't have backup for it.:confused: