w610 patches

[se-tuning]

We have to wait for simox to make the patches for db2020 :P.

[Evgenik]

Any possibility that someone makes "SIM-unlock vkp patch" for w610?

[opu_bu]

When i apply vkp file, my W610 turned to dead....
What is the reason??

here is the log:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35489401480239 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:35489401480239 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\Azimul Kabir Apu\My Documents\Downloads\Compressed\setool2lite1.11www. se-tuning.net\qamaker\patch.vkp
VKP script loaded OK. Lines: 5
Patch structure created OK. Determining blocks to read...
New block #0000 added: $45100000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:469 secs.

What should i do now?

[DomagojX]

look here.....

[opu_bu]

I've successfully applied the "Radio without headset" patch for R8BA024. My radio turned on without headset but it cant find any channels... what is the problem???
can anyone help me please??

Thank you....

[DomagojX]

u must set your finger at connector or peace of metal

[ts013]

LOL.
Now look. Your phone is a radio. You unplug the antenna - guess what - you haven't got a signal anymore ;)
It has been discussed several times if that patch has any use at all.

[opu_bu]

LOL.
Now look. Your phone is a radio. You unplug the antenna - guess what - you haven't got a signal anymore ;)
It has been discussed several times if that patch has any use at all.

What do you mean by that?
Is this patch doesn't work?

Ok i understand... Thanks...

[jasmin]

It does, but how will you get radio signal into phone without a antenna.
Your headset is a antenna.

Nice day

[opu_bu]

Hey man,
I got another problem:(
I tried to applied following patch

;W610 SW-R6BC002
;Замена папки desktop
;/tpa/preset/system/desktop -> /usb/other/flash

But it shows some kind of error....
Here is the Log

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:51 PAF:1 IMEI:35489401480239 CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Starting to process VKP patch script: C:\Documents and Settings\Azimul Kabir Apu\My Documents\Downloads\Compressed\setool2lite1.11www. se-tuning.net\qamaker\patch tpa.vkp
VKP script loaded OK. Lines: 22
New\old data length mismatch in script line: 70B4A8: 2F007400700061002F007000720065007300650074002F0073 0079007300740065006D002F006400
Elapsed:25 secs.

What is the problem?
Can anyone please reply me soon??

Thanks.....