I tired . XS++ and FarManager . same problem .
The Driver Installed from Sony Ericsson Website , W800.exe .
What if the problem related to MS DUO, is that possible ?
I tired . XS++ and FarManager . same problem .
The Driver Installed from Sony Ericsson Website , W800.exe .
What if the problem related to MS DUO, is that possible ?
just like number1,try with xs 3.1,and that problem with "Phone Preboot Failed...." it's just from the flash drivers.
That isn't the USB flash driver. You will find the required driver in SETool2Lite_folder\drivers\usb_flash_driver\gg-setup.exe (version 1.08 and earlier) or in SETool2Litev_folder\drivers\usb_flash_driver\ggsemc.inf (version 1.10). In this case right click on ggsemc.inf and choose Install.
Now it should work...
Here after my 1.000.000 attempts with XS++
Yes , I got that driver and installed . Gordona Gate .
![]()
I Think U Re Need To Backup U Re Gdfs And Then U Reflashed
Make sure that the battery to be fully charged. Turn off your phone and remove the battery, wait a few seconds then put it back(but DO NOT try to turn on). In XS++ click Connect, press and hold the 'c' key on phone and connect the cable. When you see some progress in XS++, release the 'c' key...
Last edited by simox; 01-04-2008 at 08:00 AM.
The latest version is v1.11.
try again bro, try to fully charge the battery, sometimes it is caused fail to open, and install the correct usb driver
remove SE pc suite and try again. (remember to reboot ur pc)
There are currently 1 users browsing this thread. (0 members and 1 guests)