Camera not working K810 (K800)

[XepheX]

Hi!

Got a problem with the camera. Have flashed to K810 and when finished
it worked as expected.

But now, when i remove the lens cover the screen gets white, keypad lits up
the all gets black. A few seconds later the screen and keypad comes back as supposed to, if the cover is closed. Else it does the same procedure again.

Re flashed the phone but it didn't helped.
But if I'm using the camera from face Warp it works.

Any suggestions to a solution?

I've changed the font and menu, but that shouldn't matter, right?

[debeliz]

Try start camera manualy, when the cover is open.

[XepheX]

To bad, but that didn't worked. Same symptoms as described above.

[jasmin]

Better that you flash it back to k800i or flash it again with k810i software.

Nice day

[XepheX]

I've tried to flash it again with K810 firmware, but it didn't help.

[debeliz]

Try flash to k800 soft and then try your camera.

[louis*cyphre]

did you use the k810 keys patch before you flashed the k800 with k810 firmware?

if not, then try following the guide in esato forum about converting k800 to k810. maybe you missed some steps while flashing it.

[debeliz]

[QUOTE=louis*cyphre;48512]did you use the k810 keys patch before you flashed the k800 with k810 firmware?QUOTE]


Whats that? I flash my k800 with k180 firm without any patc and it work perfectly.

[XepheX]

Yes, i used the key patch.

debeliz -> The patch is for some keys to be lit up in camera mode, which not are working after k800 k810 update.

[debeliz]

Yes, i used the key patch.

debeliz -> The patch is for some keys to be lit up in camera mode, which not are working after k800 k810 update.

But thats are only lights, that should not have matter with camera.
Maybe this didn't software problem?