XS++ 3.1 Guide-Flashing, Customizing, Recovering

[evilzeal]

i tried to connect my dead k800i with xs, when click flash, i only got port opened at the bottom of the software and nothing happen then..y?

tried with setool lite, i got this 'csloader refused to start gdfs'

[kapaionutz]

why your k800 is dead?
do you heave any GDFS backup?
'csloader refused to start gdfs' = means that your gdfs is dead
try to put a backup of your gdfs.

[Passowa]

Ok, I flashed my phone and I think one of the files was for America...
I inserted my simcard and it said:

configuration error. please contact your network operator or service center

what should I do now??

18:02:04| Hold 'C' button on phone and connect phone NOW.
18:02:04| You have 30 seconds...
18:02:04|
18:02:04| Baseband ID: 9900
18:02:04| Protocol Version: 3.1
18:02:05| Phone name detected!
18:02:05|
18:02:05| Profiling SEMC phone...
18:02:05| Platform: DB2020
18:02:05| OTP CID: 51
18:02:05| EROM CID: 52
18:02:05| EROM Color: Red
18:02:05| IMEI: 35928501xxxxxx
18:02:05| Phone ID: W580
18:02:05| Region: ORANGE_GEN
18:02:05| CDA: CDA102774/110 R4A
18:02:05| Firmware Version: R8BE001
18:02:05| EROM: R3A022
18:02:05| Ready for operation!
18:02:14| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
18:02:14| Custpack: AMERICA_2 (CDA102460/101) (K510)
18:02:14| Generic(non-branded) custpack: Yes
18:02:14| Allowed languages: en, pb, xl,


when i want to adjust the custpack, the w580i isn't in the list of phone types...:confused:
I'm from belgium...so i need dutch language etc
HELP??

[mlm122]

Ok, I flashed my phone and I think one of the files was for America...
I inserted my simcard and it said:

configuration error. please contact your network operator or service center

what should I do now??

18:02:04| Hold 'C' button on phone and connect phone NOW.
18:02:04| You have 30 seconds...
18:02:04|
18:02:04| Baseband ID: 9900
18:02:04| Protocol Version: 3.1
18:02:05| Phone name detected!
18:02:05|
18:02:05| Profiling SEMC phone...
18:02:05| Platform: DB2020
18:02:05| OTP CID: 51
18:02:05| EROM CID: 52
18:02:05| EROM Color: Red
18:02:05| IMEI: 35928501xxxxxx
18:02:05| Phone ID: W580
18:02:05| Region: ORANGE_GEN
18:02:05| CDA: CDA102774/110 R4A
18:02:05| Firmware Version: R8BE001
18:02:05| EROM: R3A022
18:02:05| Ready for operation!
18:02:14| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
18:02:14| Custpack: AMERICA_2 (CDA102460/101) (K510)
18:02:14| Generic(non-branded) custpack: Yes
18:02:14| Allowed languages: en, pb, xl,


when i want to adjust the custpack, the w580i isn't in the list of phone types...:confused:
I'm from belgium...so i need dutch language etc
HELP??

You need the custpack for the W580 that contains the dutch language.
HB1-06_Gen_CDA102568_12_R8A_GENERIC_EUROPE_3

Here you will find out how to gain access to the downloads area.

How to get access to Download Area? - Top Sony Forums

Good Luck!

[Angel19]

Unpack .rar archive in XS++ folder /own custpack/ and in XS++ in section customization select own custpack

thanx for this info..coz i confious where to place my cust pack before

[gsusisking]

Backing up my GDFS doesn't work on my phone because it says that my phone is not supported. Right now the CID is 53. Is there a way to get around that problem? Will flashing it put it back to CID 52? or will it keep it a CID 53. Here's the logistics:
Baseband ID: 9900
21:45:42| Protocol Version: 3.1
21:45:42| Phone name detected!
21:45:42|
21:45:42| Profiling SEMC phone...
21:45:42| Platform: DB2020
21:45:42| OTP CID: 49
21:45:42| EROM CID: 53
21:45:42| EROM Color: Red
21:45:42| IMEI: 35170801xxxxxx
21:45:42| Phone ID: K800
21:45:42| Region: HONG_KONG
21:45:42| CDA: CDA102511/85 R10A
21:45:42| Firmware Version: R8BF003
21:45:42| EROM: R3A022
21:45:42| Ready for operation!
21:45:59| Sorry, your phone is NOT SUPPORTED
21:45:59| Error: Failed to send CSLoader!
21:45:59| FSX Shutdown!
21:46:01| Disconnected... Unplug the phone
So i'm confused with what i'm supposed to do?

[SeaMonkey]

Backing up my GDFS doesn't work on my phone because it says that my phone is not supported. Right now the CID is 53. Is there a way to get around that problem? Will flashing it put it back to CID 52? or will it keep it a CID 53. Here's the logistics:
Baseband ID: 9900
21:45:42| Protocol Version: 3.1
21:45:42| Phone name detected!
21:45:42|
21:45:42| Profiling SEMC phone...
21:45:42| Platform: DB2020
21:45:42| OTP CID: 49
21:45:42| EROM CID: 53
21:45:42| EROM Color: Red
21:45:42| IMEI: 35170801xxxxxx
21:45:42| Phone ID: K800
21:45:42| Region: HONG_KONG
21:45:42| CDA: CDA102511/85 R10A
21:45:42| Firmware Version: R8BF003
21:45:42| EROM: R3A022
21:45:42| Ready for operation!
21:45:59| Sorry, your phone is NOT SUPPORTED
21:45:59| Error: Failed to send CSLoader!
21:45:59| FSX Shutdown!
21:46:01| Disconnected... Unplug the phone
So i'm confused with what i'm supposed to do?

For now only way for flashing CID53 is with Jdflasher CID53 update - Top Sony Forums and for doing this use this tutorial Flash K800 CID53 with K810 software CID53 (for begginers) - Top Sony Forums

[mypost]

woah! I dont understand a thing! i've been scrolling this page for about 20 times. but I dont understand :eek:

[eekram1]

hi its ekram. i would like to request you where i can find the .mbn ie. main firmware.
i am stuck in this section.
Thanks in advance....

[SeaMonkey]

hi its ekram. i would like to request you where i can find the .mbn ie. main firmware.
i am stuck in this section.
Thanks in advance....

Download section - firmware - your phone model - CID... -phone model_Firmware No_ MAIN_GENERIC_RED...