XS++ 3.1 Guide-Flashing, Customizing, Recovering

[Sinc]

I tried patching my phone and got this error... Would appreciate any advice... thanks...


19:20:17| Hold 'C' button on phone and connect phone NOW.
19:20:17| You have 30 seconds...
19:20:17|
19:20:23| Baseband ID: 9900
19:20:23| Protocol Version: 3.1
19:20:23| Phone name detected!
19:20:23|
19:20:23| Profiling SEMC phone...
19:20:23| Platform: DB2020
19:20:23| OTP CID: 51
19:20:23| EROM CID: 52
19:20:23| EROM Color: Red
19:20:23| IMEI: 35220801xxxxxx
19:20:23| Phone ID: K790
19:20:23| Region: AMERICA_1
19:20:23| CDA: CDA102535/301 R11A
19:20:23| Firmware Version: R1GB001
19:20:23| EROM: R3A016
19:20:23| Ready for operation!
19:22:27|
19:22:27| Sending db2020_cid01_prodid_p3j.bin...
19:22:27| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
19:22:27| This is a PRODUCTION_ID loader
19:22:27|
19:22:27| Sending db2020_mem_patcher_cid52_r2a006.bin...
19:22:28| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
19:22:28| This is a MEM_PATCHER loader
19:22:28|
19:22:28| Sending db2020_cid52red_flash_r2a005.bin...
19:22:28| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
19:22:28| This is a FLASH loader
19:22:28| Now flashing firmware main...
19:22:28| Flashing c:\documents and settings\k790_r8bf003_main_generic_ev_red53.mbn
19:22:28| Header type: BABE
19:22:28| 460 flashblocks
19:22:28| Binary acknowledge failed with: 89
19:22:28| Failed
19:22:29| Binary acknowledge failed with: 68
19:22:29| Command: Error 0x68
19:22:29| Failed sending flashblock 1. Returnvalue 0xD0022D00
19:22:29| Finishing flash
19:22:29| Binary acknowledge failed with: 02
19:22:29| Failed
19:22:29| Failed

Just realized... Was using red53 instead of red52. Using the correct file fixed the patching problem.

It might help future users if we added one additional point on how to identify the correct file in the tutorial