XS++ 3.1 Guide-Flashing, Customizing, Recovering

[SeaMonkey]

Hi, I have a W580i from Cingular and i used this tutorial to debrand my phone, the files I used were:

W580_R8BE001_MAIN_GENERIC_LA_RED53.mbn
W580_R8BE001_FS_AMERICA_1_RED53.fbn

here is the log:

17:19:02| XS++ v3.1 (Darwin) Ready !
17:19:02| Executed on Microsoft Windows XP
17:19:09| 
17:19:09| Attempting to open the interface...
17:19:09| 
17:19:09| TURN OFF PHONE!
17:19:09| Hold 'C' button on phone and connect phone NOW.
17:19:09| You have 30 seconds...
17:19:09| 
17:19:15| Baseband ID: 9900
17:19:15| Protocol Version: 3.1
17:19:15| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:W580)
17:19:15| ...using GDFS name
17:19:15| 
17:19:15| Profiling SEMC phone...
17:19:15| Platform: DB2020
17:19:15| OTP CID: 51
17:19:15| EROM CID: 52
17:19:15| EROM Color: Red
17:19:15| IMEI: 01157200xxxxxx
17:19:15| Phone ID: W580
17:19:15| Region: CINGULAR
17:19:15| CDA: CDA102774/102   R25A
17:19:15| Firmware Version: R8BE001
17:19:15| EROM: R3A022
17:19:15| Ready for operation!
17:20:56| 
17:20:56| Sending db2020_cid01_prodid_p3j.bin...
17:20:56| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
17:20:56| This is a PRODUCTION_ID loader
17:20:56| 
17:20:56| Sending db2020_mem_patcher_cid52_r2a006.bin...
17:20:57| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
17:20:57| This is a MEM_PATCHER loader
17:20:57| 
17:20:57| Sending db2020_cid52red_flash_r2a005.bin...
17:20:57| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
17:20:57| This is a FLASH loader
17:20:57| Now flashing firmware main...
17:20:57| Flashing c:\documents and settings\bt\desktop\fw\w580_r8be001_main_generic_la_red53.mbn
17:20:57| Header type: BABE
17:20:57| 460 flashblocks
17:20:57| Binary acknowledge failed with: 89
17:20:57| Failed
17:20:58| Binary acknowledge failed with: 68
17:20:58| Command: Error 0x68
17:20:58| Failed sending flashblock 1. Returnvalue 0xD0022D00
17:20:58| Finishing flash
17:20:58| Binary acknowledge failed with: 02
17:20:58| Failed
17:20:58| Failed

It has been like that for about 20 minutes, should i continue to wait? or did I do something wrong and it won't work?

It also might be worth noting that i used Gordons Gate USB Flash Driver.

should I use setool or JDflash instead of XS++?

the status on the bottom for almost 50 min now has been:
Sending flashblock 1/460. Address=44140000 Size=00010000

EDIT: I stopped the flashing, the phone works fine, but with Cingular firmware, it turns out that this method does not work for CID53, which i have, i'll look into JDFlasher

Your phone is CID52 and you need this
MAIN- Downloads - R8BE001_RED52 - W580_R8BE001_MAIN_GENERIC_LA_RED52 - Top Sony Forums
FS- Downloads - R8BE001_RED52 - W580_R8BE001_FS_AMERICA_1_RED52 - Top Sony Forums
CUSTPACK- Top Sony Forums