XS++ 3.1 Guide-Flashing, Customizing, Recovering

[Sinc]

I tried patching my phone and got this error... Would appreciate any advice... thanks...


19:20:17| Hold 'C' button on phone and connect phone NOW.
19:20:17| You have 30 seconds...
19:20:17|
19:20:23| Baseband ID: 9900
19:20:23| Protocol Version: 3.1
19:20:23| Phone name detected!
19:20:23|
19:20:23| Profiling SEMC phone...
19:20:23| Platform: DB2020
19:20:23| OTP CID: 51
19:20:23| EROM CID: 52
19:20:23| EROM Color: Red
19:20:23| IMEI: 35220801xxxxxx
19:20:23| Phone ID: K790
19:20:23| Region: AMERICA_1
19:20:23| CDA: CDA102535/301 R11A
19:20:23| Firmware Version: R1GB001
19:20:23| EROM: R3A016
19:20:23| Ready for operation!
19:22:27|
19:22:27| Sending db2020_cid01_prodid_p3j.bin...
19:22:27| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
19:22:27| This is a PRODUCTION_ID loader
19:22:27|
19:22:27| Sending db2020_mem_patcher_cid52_r2a006.bin...
19:22:28| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
19:22:28| This is a MEM_PATCHER loader
19:22:28|
19:22:28| Sending db2020_cid52red_flash_r2a005.bin...
19:22:28| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
19:22:28| This is a FLASH loader
19:22:28| Now flashing firmware main...
19:22:28| Flashing c:\documents and settings\k790_r8bf003_main_generic_ev_red53.mbn
19:22:28| Header type: BABE
19:22:28| 460 flashblocks
19:22:28| Binary acknowledge failed with: 89
19:22:28| Failed
19:22:29| Binary acknowledge failed with: 68
19:22:29| Command: Error 0x68
19:22:29| Failed sending flashblock 1. Returnvalue 0xD0022D00
19:22:29| Finishing flash
19:22:29| Binary acknowledge failed with: 02
19:22:29| Failed
19:22:29| Failed

Just realized... Was using red53 instead of red52. Using the correct file fixed the patching problem.

It might help future users if we added one additional point on how to identify the correct file in the tutorial

[pejmany]

umm... does this work on phones that have not been debranded? like rogers (if any of you know)... in canada?
cause i tried like 3 or 4 times and it didn't work...
Phone: W580
OTP CID 51
EROM: CID52
tried to use:
MAIN:W580_R8BE001_MAIN_GENERIC_LA_RED52.mbn
FS:W580_R8BE001_FS_AMERICA_1_RED53.fbn
CUST:HB1_06_Gen_CDA102568_15_R8A_GENERIC_AMERICA_1 .zip

Do you know what i'm doing wrong?
thanks in advance

[Willin08]

umm... does this work on phones that have not been debranded? like rogers (if any of you know)... in canada?
cause i tried like 3 or 4 times and it didn't work...
Phone: W580
OTP CID 51
EROM: CID52
tried to use:
MAIN:W580_R8BE001_MAIN_GENERIC_LA_RED52.mbn
FS:W580_R8BE001_FS_AMERICA_1_RED53.fbn
CUST:HB1_06_Gen_CDA102568_15_R8A_GENERIC_AMERICA_1 .zip

Do you know what i'm doing wrong?
thanks in advance

FS:W580_R8BE001_FS_AMERICA_1_RED53.fbn

That's your problem. Use CID 52, not CID 53.

[pejmany]

Well, i got the 52, tried to use it, but the XS++ just shut off when it got to around 400 blocks...
do you know the problem?

[SeaMonkey]

Well, i got the 52, tried to use it, but the XS++ just shut off when it got to around 400 blocks...
do you know the problem?

Try with Setool2lite

[pejmany]

Try with Setool2lite

just did, using this...
still didn't work :(
the phone was still branded...
Oh, i also DID use the simoXautogenerator this time, if that matters?

[SeaMonkey]

just did, using this...
still didn't work :(
the phone was still branded...
Oh, i also DID use the simoXautogenerator this time, if that matters?

You have to do full flash ( MAIN,FS and CUSTPACK) at the same time using Setool2lite

[pejmany]

alright then, thanks!
i'm gonna go start searching on full installation instructions for setool...
do you know a good one?

[SeaMonkey]

alright then, thanks!
i'm gonna go start searching on full installation instructions for setool...
do you know a good one?

Here you have Flash your phone using SETool 2 Lite - Top Sony Forums

[stiffy420]

i played around a bit in FSX... deleting things i dont think i need... but now i cant get to the main menu. everything else works fine. just the menu i cant reach... any help!? please