XS++ 3.1 Guide-Flashing, Customizing, Recovering

[Angel19]

Unpack .rar archive in XS++ folder /own custpack/ and in XS++ in section customization select own custpack

thanx for this info..coz i confious where to place my cust pack before

[BoogieTrai]

worked great, my phone is now debranded! Thanks alot seamonkey, your responses were prompt and spot-on. Also thank you to mohdumer for the tutorial, and topsony forums.

[evilzeal]

i tried to connect my dead k800i with xs, when click flash, i only got port opened at the bottom of the software and nothing happen then..y?

tried with setool lite, i got this 'csloader refused to start gdfs'

[kapaionutz]

why your k800 is dead?
do you heave any GDFS backup?
'csloader refused to start gdfs' = means that your gdfs is dead
try to put a backup of your gdfs.

[gsusisking]

Backing up my GDFS doesn't work on my phone because it says that my phone is not supported. Right now the CID is 53. Is there a way to get around that problem? Will flashing it put it back to CID 52? or will it keep it a CID 53. Here's the logistics:
Baseband ID: 9900
21:45:42| Protocol Version: 3.1
21:45:42| Phone name detected!
21:45:42|
21:45:42| Profiling SEMC phone...
21:45:42| Platform: DB2020
21:45:42| OTP CID: 49
21:45:42| EROM CID: 53
21:45:42| EROM Color: Red
21:45:42| IMEI: 35170801xxxxxx
21:45:42| Phone ID: K800
21:45:42| Region: HONG_KONG
21:45:42| CDA: CDA102511/85 R10A
21:45:42| Firmware Version: R8BF003
21:45:42| EROM: R3A022
21:45:42| Ready for operation!
21:45:59| Sorry, your phone is NOT SUPPORTED
21:45:59| Error: Failed to send CSLoader!
21:45:59| FSX Shutdown!
21:46:01| Disconnected... Unplug the phone
So i'm confused with what i'm supposed to do?

[SeaMonkey]

Backing up my GDFS doesn't work on my phone because it says that my phone is not supported. Right now the CID is 53. Is there a way to get around that problem? Will flashing it put it back to CID 52? or will it keep it a CID 53. Here's the logistics:
Baseband ID: 9900
21:45:42| Protocol Version: 3.1
21:45:42| Phone name detected!
21:45:42|
21:45:42| Profiling SEMC phone...
21:45:42| Platform: DB2020
21:45:42| OTP CID: 49
21:45:42| EROM CID: 53
21:45:42| EROM Color: Red
21:45:42| IMEI: 35170801xxxxxx
21:45:42| Phone ID: K800
21:45:42| Region: HONG_KONG
21:45:42| CDA: CDA102511/85 R10A
21:45:42| Firmware Version: R8BF003
21:45:42| EROM: R3A022
21:45:42| Ready for operation!
21:45:59| Sorry, your phone is NOT SUPPORTED
21:45:59| Error: Failed to send CSLoader!
21:45:59| FSX Shutdown!
21:46:01| Disconnected... Unplug the phone
So i'm confused with what i'm supposed to do?

For now only way for flashing CID53 is with Jdflasher CID53 update - Top Sony Forums and for doing this use this tutorial Flash K800 CID53 with K810 software CID53 (for begginers) - Top Sony Forums

[mypost]

woah! I dont understand a thing! i've been scrolling this page for about 20 times. but I dont understand :eek:

[eekram1]

hi its ekram. i would like to request you where i can find the .mbn ie. main firmware.
i am stuck in this section.
Thanks in advance....

[SeaMonkey]

hi its ekram. i would like to request you where i can find the .mbn ie. main firmware.
i am stuck in this section.
Thanks in advance....

Download section - firmware - your phone model - CID... -phone model_Firmware No_ MAIN_GENERIC_RED...

[Atlus]

I some problem, I tried to flash a W810i (white) but I receive the bellow error:

19:32:43| Binary acknowledge failed with: 15
19:32:43| Command: Error 0x15
19:32:43| Failed sending flashblock 1. Returnvalue 0xFFFF250B

here the full output.

19:32:19| XS++ v3.1 (Darwin) Ready !
19:32:19| Executed on Microsoft Windows Vista
19:32:23|
19:32:23| Attempting to open the interface...
19:32:23|
19:32:23| TURN OFF PHONE!
19:32:23| Hold 'C' button on phone and connect phone NOW.
19:32:23| You have 30 seconds...
19:32:23|
19:32:26| Baseband ID: 8040
19:32:26| Protocol Version: 3.1
19:32:26| NEW SECURITY PHONE DETECTED! SWITCHING...
19:32:26| Phone name detected!
19:32:26|
19:32:26| Profiling SEMC phone...
19:32:26| Platform: DB2010
19:32:26| OTP CID: 50
19:32:26| EROM CID: 50
19:32:26| EROM Color: Red
19:32:26| IMEI: 35657301xxxxxx
19:32:26| Phone ID: W810
19:32:26| Region: AMERICA_2
19:32:26| CDA: CDA102295/7 R2A
19:32:26| Firmware Version: R4DB005
19:32:26| EROM: n/a
19:32:26| Ready for operation!
19:32:42|
19:32:42| Sending db2010_db2012_cid50red_flash_r1a002.bin...
19:32:42| Applet ID: 060712 1520 HAN_DB2012_FLASHLOADER_R1A002_CXC1250695
19:32:42| This is a FLASH loader
19:32:42| Now flashing firmware main...
19:32:43| Flashing e:\programas\celular flashers\se flash\w810_r4ek001_main_generic_hn_red50.mbn
19:32:43| Header type: BABE
19:32:43| 344 flashblocks
19:32:43| Binary acknowledge failed with: 15
19:32:43| Command: Error 0x15
19:32:43| Failed sending flashblock 1. Returnvalue 0xFFFF250B
19:32:43| Finishing flash