XS++ 3.1 Guide-Flashing, Customizing, Recovering

**p_mandelia** · 04-12-2008

Originally Posted by mohdumer

Well I Cant Help Without Logs. Heres A Noob Answer Which Might Help You. In FSX, Browse To /tpa/preset/custom And Paste The Custom Files (Around 10 Files) In The Pack To The Folder. Well Please Post Your XS++ Log And Also Upload Your customize.xml File So I Can Help You Out.

Thanks buddy,
The final solution was a life saver. I extracted all the customization files and here I am using the phone. It's cool & as we call it zhakaas. I think after using all this so many times, even I'll be able to help others with XS++ and Setool2lite.

My observations if helpful to other are:
1. Remove memory card also.
2. If you wanna debrand as well as unlock, you debrand first, then unlock and then use XS++ to flash FS only and customize with extracted files.
3. Chao you're done.

ENJOY!!!!;)

**kpalesha** · 04-11-2008

Platform: DB2010
10:33:01| OTP CID: 49
10:33:01| EROM CID: 49
10:33:01| EROM Color: Red
10:33:01| IMEI: 35527101xxxxxx
10:33:01| Phone ID: W700
10:33:01| Region: EMEA_6
10:33:01| CDA: CDA102663/56 R1A
10:33:01| Firmware Version: R1CA021
10:33:01| EROM: n/a
This is my w700 phone and i flshed it using the following two files:
1:for fs:W700_R1CA021_FS_EMEA_6_RED49.fbn
2:for main:W700_R1CA021_MAIN_EU_1.mbn
it flashed successfully but when i turn on my phone it shows an error:
Configuration error.
Please contact your network operator or service centre

Please help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

**jasmin** · 04-11-2008

You must finalize your phone. Look here example:

Finalization = Completing flashing operations and storing basic settings that phone needs to properly operate [i.e. security certificates, (and this is why phone displays "configuration error" if it is not properly done)].

Firmware has two parts:
1. FS: It contains languages, images, sounds, animations, settings, etc. Anything that isn't pure software.
2. Main: It contains the software.

Note: MAIN and FS HAVE to be the same software version
MAIN R1BC002
FS R1BC002
Customization has to be same region as FS, in this case
FS = EU5 (EUROPE_5)
Customization =CDA102338/50 ( EUROPE_5 Sunrise Switzerland)

Nice day

**kpalesha** · 04-11-2008

Im sorry but i did not understand what you meant by finalisation
please just tell me what i should do for the normal functioning of my phone and whether the files used for flashing were correct
i have used xs++ for flashing (just in case it helps you to help me)\
Platform: DB2010
10:33:01| OTP CID: 49
10:33:01| EROM CID: 49
10:33:01| EROM Color: Red
10:33:01| IMEI: 35527101xxxxxx
10:33:01| Phone ID: W700
10:33:01| Region: EMEA_6
10:33:01| CDA: CDA102663/56 R1A
10:33:01| Firmware Version: R1CA021
10:33:01| EROM: n/a
This is my w700 phone and i flshed it using the following two files:
1:for fs:W700_R1CA021_FS_EMEA_6_RED49.fbn
2:for main:W700_R1CA021_MAIN_EU_1.mbn

also tell me which files i should use for flashing
thanks in advance

**kpalesha** · 04-11-2008

Originally Posted by kpalesha

Im sorry but i did not understand what you meant by finalisation
please just tell me what i should do for the normal functioning of my phone and whether the files used for flashing were correct
i have used xs++ for flashing (just in case it helps you to help me)\
Platform: DB2010
10:33:01| OTP CID: 49
10:33:01| EROM CID: 49
10:33:01| EROM Color: Red
10:33:01| IMEI: 35527101xxxxxx
10:33:01| Phone ID: W700
10:33:01| Region: EMEA_6
10:33:01| CDA: CDA102663/56 R1A
10:33:01| Firmware Version: R1CA021
10:33:01| EROM: n/a
This is my w700 phone and i flshed it using the following two files:
1:for fs:W700_R1CA021_FS_EMEA_6_RED49.fbn
2:for main:W700_R1CA021_MAIN_EU_1.mbn

also tell me which files i should use for flashing
thanks in advance

I got my phone to work normally thanks to your(jasmin) post on another page about the customise thing.

**jasmin** · 04-11-2008

No problem. I`m glad that you manage to make it work.

Nice day

**Robot** · 04-11-2008

**jeanallen** · 04-14-2008

hello, i really wanted to flash my p990i but I cannot find any firmware that i can use. I surf the internet, use google but i have no luck to find one. I found 2 firmware fir p990i in the download section but i need to pay or wait for 2 months before i can download it..is there any site where i can download a firmware for my phone directly?

I don't want to use SEUS update because i have a very poor connection with a download speed of 13kb/sec,

thanks.

**mohdumer** · 04-14-2008

Pay For It. Its Only 3 Euro's. You Wont Find A Better Place For Firmwares Than TopSony:)

**Darkling** · 04-14-2008

Hello, first time poster here with a problem. So when I connect my phone to the computer, holding C and inserting the cable, the log goes like this:

Code:

06:44:04| XS++ v3.1 (Darwin) Ready !
06:44:04| Executed on Microsoft Windows XP
06:46:05| 
06:46:05| Attempting to open the interface...
06:46:05| 
06:46:05| TURN OFF PHONE!
06:46:05| Hold 'C' button on phone and connect phone NOW.
06:46:05| You have 30 seconds...
06:46:05| 
06:46:13| Baseband ID: 8040
06:46:13| Protocol Version: 3.1
06:46:13| NEW SECURITY PHONE DETECTED! SWITCHING...

And it gets stuck there. Any suggestions? I'm using a w810i, btw.

Thread: XS++ 3.1 Guide-Flashing, Customizing, Recovering

Thread Tools

Display

Hybrid View

Re:

Re: XS++ 3.1 Guide-Flashing,Customizing,Recovering

Re: XS++ 3.1 Guide-Flashing,Customizing,Recovering

The Following 2 Users Say Thank You to jasmin For This Useful Post:

Re: XS++ 3.1 Guide-Flashing,Customizing,Recovering

Re: XS++ 3.1 Guide-Flashing,Customizing,Recovering

Re: XS++ 3.1 Guide-Flashing,Customizing,Recovering

The Following User Says Thank You to jasmin For This Useful Post:

Re: XS++ 3.1 Guide-Flashing,Customizing,Recovering

Re: XS++ 3.1 Guide-Flashing,Customizing,Recovering

Re: XS++ 3.1 Guide-Flashing,Customizing,Recovering

Re: XS++ 3.1 Guide-Flashing,Customizing,Recovering

Thread Information

Users Browsing this Thread

Tags for this Thread

Posting Permissions