Page 20 of 83 FirstFirst ... 1018192021223070 ... LastLast
Results 191 to 200 of 840

Hybrid View

  1. #1
    Recently Initiate WLK's Avatar
    Join Date
    Feb 2008
    Device
    K800
    Posts
    3
    Thanks
    4
    Thanked 3 Times in 3 Posts
    OK, you convinced me! :)

    I will go for a K810i flash. Just some further info, after the flash the phone will be a K810i in everything, and the identification of the phone (like pushing up & down volume button from stand by) will be K810i right? The patch I could eventually apply have to be for K810i?

    To have the K800i light effect I have to change some file during the general K800-->K810 flash or after when the phone is already a K810i (the software to use it's always XS++?).

    Thank you!

  2. The Following User Says Thank You to WLK For This Useful Post:


  3. #2
    Top Gold 500 mohdumer's Avatar
    Join Date
    May 2007
    Device
    K790i
    Posts
    825
    Thanks
    13
    Thanked 885 Times in 220 Posts
    Just some further info, after the flash the phone will be a K810i in everything, and the identification of the phone (like pushing up & down volume button from stand by) will be K810i right?
    Yes.:) It Will Be A K810i Everywhere.

    The patch I could eventually apply have to be for K810i?
    Yes.:) Furthermore For Your Knowledge, Patch Changes Variable In MAIN So Whatever Models MAIN Is, Patch Has To Be Used For That Model.

    To have the K800i light effect I have to change some file during the general K800-->K810 flash or after when the phone is already a K810i (the software to use it's always XS++?).
    Flash It With The K810 Firmware Normally. Then Use "Uploading Files Via FSX" Section To Upload The Light Effects To /tpa/preset/system/lighteffect. I Have Attached The K800 Light Effects If You Want It.
    Attached Files
    Last edited by mohdumer; 03-01-2008 at 04:34 PM. Reason: Added K800 Light Effects

  4. The Following User Says Thank You to mohdumer For This Useful Post:


  5. #3
    Recently Initiate WLK's Avatar
    Join Date
    Feb 2008
    Device
    K800
    Posts
    3
    Thanks
    4
    Thanked 3 Times in 3 Posts
    Quote Originally Posted by mohdumer View Post
    Yes.:) It Will Be A K810i Everywhere.


    Yes.:) Furthermore For Your Knowledge, Patch Changes Variable In MAIN So Whatever Models MAIN Is, Patch Has To Be Used For That Model.


    Flash It With The K810 Firmware Normally. Then Use "Uploading Files Via FSX" Section To Upload The Light Effects To /tpa/preset/system/lighteffect. I Have Attached The K800 Light Effects If You Want It.
    Thanks for your help! ;)

    Start flashing as soon as possible! Bye.

  6. The Following User Says Thank You to WLK For This Useful Post:


  7. #4
    Recently Initiate lifelines's Avatar
    Join Date
    Mar 2008
    Device
    -
    Posts
    9
    Thanks
    0
    Thanked 2 Times in 1 Post

    Error: Cannot open phone communication port

    Hi, thanks for this great tutorial :) , I have SE W850 and I’m trying to upload some new flash menu, after starting XS++ 3.1 I turn off my phone, I hold the “c” button and I connect it to the USB cable. This is what it shows: Error: Cannot open phone communication port Disconnected... Unplug the phone.
    Same result with PhoneXS (failed to open); I’ve downloaded the ‘USB Flash Driver’ but in vain.
    Can you help me please?

  8. #5
    Recently Initiate lifelines's Avatar
    Join Date
    Mar 2008
    Device
    -
    Posts
    9
    Thanks
    0
    Thanked 2 Times in 1 Post

    Error: Cannot open phone communication port

    Hi, when I connect my phone to the PC I don't have: “Found New Hardware Wizard” pop up, I have already installed Sony Ericsson PC Suite, so I think my PC recognize my phone.
    Also I’ve downloaded and installed the USB flash driver in this folder: C:\USBFlashDriver, it includes: ‘ggsemc.inf’ ‘ggsemc.cat’ ‘x86’ folder and ‘amd64’ folder.
    Finally, I’ve removed and reinserted the Battery after turning Phone Off with the same result: Error: Cannot open phone communication port
    Thanks for your attention :)

  9. #6
    Recently Initiate kokiw700i's Avatar
    Join Date
    Feb 2008
    Device
    -
    Posts
    9
    Thanks
    3
    Thanked 1 Time in 1 Post

    Question Please help me

    Can you PLEASE tell me is there any chance to Backup the original files in the FSX before making any change????(like keeping the original menu.ml)
    Also I would like to know why do J need to flash the firmware??? is it nessesery?

  10. The Following User Says Thank You to kokiw700i For This Useful Post:


  11. #7
    Top Gold 500 mohdumer's Avatar
    Join Date
    May 2007
    Device
    K790i
    Posts
    825
    Thanks
    13
    Thanked 885 Times in 220 Posts
    You Can Get Any Original File On The Internet. Like menu.ml, Original Acoustics etc. However, If You Want You May Use FAR To Grab Original Files From Phone Before Modifying. See Customizing Using FAR Manager With DB2020 Phones And With Backward Compatibility. - Top Sony Forums
    You Need To Flash Phone With Latest Firmware To Get Rid Of Minor Bugs And Update Driver (Camera,Display,Java etc.)

  12. The Following 2 Users Say Thank You to mohdumer For This Useful Post:


  13. #8
    Recently Initiate
    Join Date
    Feb 2008
    Device
    -
    Posts
    3
    Thanks
    0
    Thanked 1 Time in 1 Post
    Hi guys... just a quick question here...

    My K850 (not supported by XS++, I knew... but plz... bear with me...) currently using CHINA_SO R1CA029.

    Lets say I am to change the phone to GENERIC_S0 R1CA029, can XS++ do it? I noticed the option is there.

    Do I need to download anything?

    I'm not going to change/customize/edit anything to my current firmware, just to change it from CHINA_SO to GENERIC_SO.

    (I'm asking this because apparently SEUS don't have the update for my version of K850, so I thought maybe by changing the above would make it do so)

    Thanks in advance!

  14. The Following User Says Thank You to shondown For This Useful Post:


  15. #9
    Top Gold 500 mohdumer's Avatar
    Join Date
    May 2007
    Device
    K790i
    Posts
    825
    Thanks
    13
    Thanked 885 Times in 220 Posts
    Sorry Dude You Cant.:o XS++ 3.1 Only Supports Detecting Of K850 But Cant Change It In Any Way.

  16. The Following User Says Thank You to mohdumer For This Useful Post:


  17. #10
    Top Gold 500 mohdumer's Avatar
    Join Date
    May 2007
    Device
    K790i
    Posts
    825
    Thanks
    13
    Thanked 885 Times in 220 Posts
    You Should Use K800_R8BF003_MAIN_GENERIC_WI_RED52 As MAIN. For FS You May Use Any FS Depending Upon Your Region Like If You Live In Russia, You Should Use C_ASIA(Central Asia) But Make Sure You Use R8BF003 Since Your MAIN Is R8BF003. Now Coming To Your Custpack, You May Match A Custpack With Your FS Here.:) If You Still Have Any Problem Matching Your CDA, Tell Me What FS Are You Using!

  18. The Following User Says Thank You to mohdumer For This Useful Post:


Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •