Beginner Debrand on W810i

[krdu]

SeTool/XS++ and unlocking patch, the patch was posted on this thread,
Unlock and Reprogram help for SE W810i - Top Sony Forums

I originally asked that question and the help I got allowed me to de-brand the phone. Unfortunately, I can't seem to write a patch to the phone.

I start SETool Lite Edition v 1.08. It gives the following message on load:

Supported DB2010/DB2012 CID49/51/52
Loaded 51 flash descriptors

I select "W810" from the model box.

I then remove the battery from the phone, replace it, and click "Identify." I get "Hold 'C' and insert USB cable!" which I do. An entry is addrd to the log file, "12/23/2007 11:47:20 AM identify, IMEI 35--------------"

SETool displays the following:

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35--------------- CERT:RED
FLASH CID:49 COLOR:RED

MAPP CXC article: R4EA031 prgCXC1250316_GENERIC_HN
MAPP CXC version: R4EA031
Language Package:AMERICA_1
CDA article: CDA102555/106
CDA version: R2A
Default article: cxc1250324
Default version: R4ED001

Network LOCKED
Operator: MULTIPLE

USERCODE:0000

Elapsed:9 secs.


Then I click the filefind button next to "Misc Files" and select "Remove_SIM_lock_W810_R4EA031.vkp" I then select "Write Script." I then see, "Going to execute VKP script."

The blue line runs to the end, starts over, runs to the end, and does this forever.

Finally I click "Stop."
The display says,

Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:136 secs.

I then re-boot the phone, works fine, not unlocked.

I have done this about 2 million times with different versions of SETool and different copies of the same version. I have also tried XS++ but the "apply Patch" button is greyed out and I can't apply the patch.

What am I doing wrong?

================================================

TOTAL LOG ENTRIES:

=================================================
welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35----------------- CERT:RED
FLASH CID:49 COLOR:RED

MAPP CXC article: R4EA031 prgCXC1250316_GENERIC_HN
MAPP CXC version: R4EA031
Language Package:AMERICA_1
CDA article: CDA102555/106
CDA version: R2A
Default article: cxc1250324
Default version: R4ED001

Network LOCKED
Operator: MULTIPLE

USERCODE:0000

Elapsed:9 secs.
Going to execute VKP script....
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:136 secs.