unlocking db2020 cid52 is now free..using usb cable for cruiser

[roth_28]

yes... unlocking your db2020 cid 52... is now free...
using your cruiser box...via usb cable...

CID 52 patch unlocking

1. For unlocking you can use only DCU-60 cable.

2. Download latest firmware for your phone (ARM and FS file).
Open USB cable window in Cruiser.



3. In Primary tab -> Attach phone.



4. Flash -> Write raw FS



5. Security RSA -> Unlock RSA



6. Flash -> Flash ARM



7. Locks -> Direct unlock



8. Flash -> Select language pack and firmware version matching FS flash file



9. Customize FS



10. Main tab -> Turn off phone

CRUISER BOX Users:How To Upgrade CID 49,50,51 To CID52 :
Be sure to upgrade the EROM before performing this conversion!

· Attach the phone normally, then go to the GDFS tab,

· from the Modify GDFS options list choose Upgrade to CID52 and press the Modify GDFS button.

· Then turn the phone off (for example by pressing the Finalize GDFS button).

The CID will be upgraded during the next EROM code execution, i.e. during phone startup or boot via DCU-60 (while holding the C key).

[GinnCorvus]

Sorry but what is a "cruiser box"? Which soft above? Its necessary to buy any log?

[ts013]

This is quite useless for the average user. It's the unlocking procedure with Cruiser Plus (full version, you have to buy it) - patch unlocking.
You can patch unlock DB2020 phones with the_laser's or den_po's tools already.

[xulos]

This is quite useless for the average user. It's the unlocking procedure with Cruiser Plus (full version, you have to buy it) - patch unlocking.
You can patch unlock DB2020 phones with the_laser's or den_po's tools already.

do you need some box or just that software and dcu-60 and where we can download that soft ?

[DK_]

do you need some box or just that software and dcu-60 and where we can download that soft ?

you might need to buy that software or an account for that software

Use this to unlock your phone its easier: Remove SIM-lock patch generator - Top Sony Forums


DK_

[roth_28]

first you must have this

CRUISER PRO BOX
download the latest firmware..13.01
use usb cable..

[mtm]

is this cruiser free or not? because you said only to download it? download it where?

[khli2001]

where can i download this sofeware?

[saarcgsm]

yes... unlocking your db2020 cid 52... is now free...
using your cruiser box...via usb cable...

CID 52 patch unlocking

1. For unlocking you can use only DCU-60 cable.

2. Download latest firmware for your phone (ARM and FS file).
Open USB cable window in Cruiser.



3. In Primary tab -> Attach phone.



4. Flash -> Write raw FS



5. Security RSA -> Unlock RSA



6. Flash -> Flash ARM



7. Locks -> Direct unlock



8. Flash -> Select language pack and firmware version matching FS flash file



9. Customize FS



10. Main tab -> Turn off phone

CRUISER BOX Users:How To Upgrade CID 49,50,51 To CID52 :
Be sure to upgrade the EROM before performing this conversion!

· Attach the phone normally, then go to the GDFS tab,

· from the Modify GDFS options list choose Upgrade to CID52 and press the Modify GDFS button.

· Then turn the phone off (for example by pressing the Finalize GDFS button).

The CID will be upgraded during the next EROM code execution, i.e. during phone startup or boot via DCU-60 (while holding the C key).

Thanks for your share?

where can i download this sofeware?

http://md.gsmdownload.net
user: cruiser
pass: cruiser

[ts013]

Cruiser Plus is not free. You need to buy it just like SE Tool 3. Even if you get the software from somewhere you can't use it because it's dongle-protected.
As soon as the first unlock patches are released for DB2020 you can apply them with SE Tool lite 1.1 or jdflasher.

Thread is closed