K790 dead after uploading GDFS

[desilook]

Hi,
K790 is CID49 RED, I debranded it successfully with R1EIXXXX (Initial locked with Rogers) but when I uploaded GDFS it gone dead. In used XS++ 3.1 to upload. Phone never update to CID 52 even XS++ asked to update to CID 52.

Any help will be greatly appreciated.

[abmadman]

Uploaded?? You mean backed up or wrote on the phone?

[gonzzzo]

Hi,
K790 is CID49 RED, I debranded it successfully with R1EIXXXX (Initial locked with Rogers) but when I uploaded GDFS it gone dead. In used XS++ 3.1 to upload. Phone never update to CID 52 even XS++ asked to update to CID 52.

Any help will be greatly appreciated.

If writhe GDFS on phone, now You have one expensive brick.
If You have gdfs Backup writhe back to phone and flash main+fs.
If You have not GDFS BACKUP sorry.

[desilook]

I got this GDFS from 4shared website and it is for k790.

Hi abmadman,

thank for reply, I loaded GDFS on phone using XS++ 3.1 and it is now dead. I used USB Cable to load which included with phone.

regards,

Hi gonzzzo,

yes, i have backup of my GDFS but phone is not comming ON. XS++ can not read. Also SETool do not recognize this phone

thanks

[mohdumer]

Then You Dont Have k790. You Have An Expensive Brick. If Its Under Warranty, That Better, If Not, Then You Dont Have Any Solution For Repairing It.
I'm Sorry

[abmadman]

Hey mate,
sorry to hear what happened.
I'd recommend you go to a pro at a sony ericsson shop and get it fixed. I know people who've gotten bad GDFS writes fixed, but they were all db2010s. Give it a shot though

[desilook]

thanks all for reply,

So even I have backup of K790 GDFS , I can not load that GDFS back to phone. Is it right?

regards,

[Khaba]

thanks all for reply,

So even I have backup of K790 GDFS , I can not load that GDFS back to phone. Is it right?

regards,

you could try but I'm am sorry to say it but, as other said you have an expensive brick, What where you thinking when you did that? Do you have any notions about flashing phone or GDFS, EROM OTP and so on? GDFS is unique to each phone, I guess you didn't know that, the best thing to do is take it to a service center, if it's under warranty say that you can't turn it on, if it's not under waranty be prepeared to pay, or you could buy yourself a new phone and use this as a display model. Good luck!

PS: you got your GDFS backed up before loading the other GDFS from that site or you backed up after you loaded the GDFS? if you did it before you might have a chance if you did it after you might have half a chance at a professional.

[desilook]

yes,
I have backup GDFS before uploading New GDFS. I used SEtool lite to backup GDFS and it is bin file. I don't had knowldge that GDFS is unique for each phone.

So If it is possible to load original GDFS, kindly let me know details.

thanks

[Khaba]

yes,
I have backup GDFS before uploading New GDFS. I used SEtool lite to backup GDFS and it is bin file. I don't had knowldge that GDFS is unique for each phone.

So If it is possible to load original GDFS, kindly let me know details.

thanks

give it a try, place the gdfs back-up in misc, at phone type choose your model, and press Write GDFS, don't worry you can't brick your phone more than it is now, when it's finished, remove battery, replace it and flash the phone with fresh firmware, maybe this will bring your phone back, but I don't guarantee.