W850i flashing white (was) noe nothing.

[englewood]

Thanks i got my phone hooked up to xs++ not sure on which ones of these i need.
III. Choosing the correct firmware:
IV. Flashing the firmware to your phone:
V. Uploading acoustics/camdrivers etc
VI. Upgrading the EROM

[ts014]

setool2 lite has just repaired your erom so no need to flash it, i assume you want to flash the phone, if you post up a xs++ log i'll tell you what firmware you need

[englewood]

Sorry but how do i get the xs++ log, sorry thanks

[ts014]

Sorry but how do i get the xs++ log, sorry thanks

where the xs++.exe is there will be a file called XS++.log thats the xs++ you can open it in notepad and copy and paste the information

[englewood]

Platform: DB2020

OTP CID: 49

EROM CID: 49

EROM Color: Red

IMEI: 35282601xxxxxx

Phone ID: W850

Region: ORANGE_GEN

CDA: CDA102677/36 R11A

Firmware Version: R1ED001

EROM: R3A016

[ts014]

EROM CID: 49
thats a old erom and your firmware is old aswell
Firmware Version: R1ED001,
have you tryed updating the phone with seus, it will probley fix your phone you can get seus from Sony Ericsson - Sony Ericsson
,

[englewood]

Some reason XS++ says 52 and seetool lite says 49

[ts014]

If erom cid:52, if not you need to use seus or xs++ to update to cid:52

to unbrand,repair,update your phone you need
W850_R1KG001_MAIN_GENERIC_CY_RED52
W850_R1KG001_FS_EUROPE_2_RED52
custpack: HB1-06_Gen_CDA102568_11_R5A_GENERIC_EUROPE_2

u need xs++3.1,
the main goes in the main box (make sure you unzip it first)
the fs goes in the filesystem box (make sure you unzip it first)
select customize filesystem check the drop down list of custpacks to see if it has the correct one for your phone,
if it does then select it and press flash.

[englewood]

Cheers pal, giving seus ago first then will try your method thanks for your help.

I got update failed from seus is this bad? It has got stuck on 93% and said failed!

[englewood]

Hi pal finaly got round to giving it a try, now it gets stuck on flashing file system, 172/237 blocks :confused:
Sending db2020_cid01_prodid_p3j.bin...

09:35:09| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J

09:35:09| This is a PRODUCTION_ID loader

09:35:09|

09:35:09| Sending db2020_mem_patcher_cid52_r2a006.bin...

09:35:09| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0

09:35:09| This is a MEM_PATCHER loader

09:35:09|

09:35:09| Sending db2020_cid52red_flash_r2a005.bin...

09:35:09| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005

09:35:09| This is a FLASH loader

09:35:09| Now flashing firmware main...

09:35:10| Flashing c:\documents and settings\graham\desktop\w850_r1kg001_main_generic_ cy_red52.mbn

09:35:10| Header type: BABE

09:35:10| 460 flashblocks

09:39:10| Finishing flash

09:39:11| Done flashing

09:39:11| Now flashing filesystem...

09:39:11| Flashing c:\documents and settings\graham\desktop\w850_r1kg001_fs_europe_2_r ed52.fbn

09:39:11| Header type: BABE

09:39:11| 237 flashblocks

Right finaly got pass that bit all flash but phone dead as a dodo any ideas??