Remove SIM-lock patch generator

[super-pat]

I need help flashing ma phone only every time i try to flash it. it disconnets wiv out acctualy moving the cable/phone or pc plkz help :(:(:(:(

[simox]

You connect the phone to cable, the Windows recognizes it, and then just disconnects? Can you explain more exactly what happened? And post the log too...

[boxer]

Quick question on applying the Simox unlock patch. Do I have to first flash the firmware before applying the patch, or can I just apply the patch. I have read different tutorials and most don't mention having to flash the firmware, but at least one or two say to flash the firmware first. Is this required, if so why? Is it to make sure the firmware matches the patch? If so, do I have to flash both Main and FS? Thanks.

[SeaMonkey]

Quick question on applying the Simox unlock patch. Do I have to first flash the firmware before applying the patch, or can I just apply the patch. I have read different tutorials and most don't mention having to flash the firmware, but at least one or two say to flash the firmware first. Is this required, if so why? Is it to make sure the firmware matches the patch? If so, do I have to flash both Main and FS? Thanks.

Main + VKP patch

[super-pat]

ok i managed to flash a main file the W850_R1KG001_MAIN_GENERIC_RED52

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35282601051370 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\MATT\My Documents\Se stuff\setool2lite\W850_R1KG001_MAIN_GENERIC_RED52\ W850_R1KG001_MAIN_GENERIC_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Elapsed:257 secs.

but when i go to the menu it says
error occur in the menu.ml file. this may render the menu unusable plz help me :(

[SeaMonkey]

ok i managed to flash a main file the W850_R1KG001_MAIN_GENERIC_RED52

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35282601051370 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\MATT\My Documents\Se stuff\setool2lite\W850_R1KG001_MAIN_GENERIC_RED52\ W850_R1KG001_MAIN_GENERIC_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Elapsed:257 secs.

but when i go to the menu it says
error occur in the menu.ml file. this may render the menu unusable plz help me :(

Flash all 3 files: MAIN,FS and CUSTPACK

[super-pat]

where can i get a custpack?

[boxer]

SeaMonkey,

Thanks for your reply, but I still have a few questions:

1. Is there any way to backup my existing firmware in the phone before I flash it? I am worried that if I flash with the wrong firmware, I might mess things up, so I'd like to have a backup. Is backing up GDFS the same as backing up Main (I've already backed up GDFS).
2. If I only flash Main and not FS, isn't it possible that my FS and Main will no longer match? Again, the concern is if I have downloaded the wrong Firmware (perhaps), so I could flash with a different Main than what matches my FS in the phone.
3. Is flashing Main and VKP all in 1 step, or do I do each separately?

Thanks

[bullseye50]

Hello ya all!
Im new to this forum, and i found simox generator elsewhere, but all the time i try to patch my MAIN, i got one problem. My phone is K800i, Vodafone release and the firmware is R1ED001 RED CID49.
this is the message i get from the generator:

Selected firmware: C:\Documents and Settings\Michal Šelep\My Documents\Asphalt\K800_R1ED001_MAIN_GENERIC_WI_RED 49.mbn
Analyzing firmware...
BABE header integrity check failed! "C:\Documents and Settings\Michal Šelep\My Documents\Asphalt\K800_R1ED001_MAIN_GENERIC_WI_RED 49.mbn" firmware is probably corrupted!

I have tried to download the firmware from different pages, but i still get this message. If someone can help, thank you in advance :)

bye for now

[simox]

There is nothing wrong with the firmware. This is a bug of my tool. I haven't corrected it because DB2020 CID49 phones cannot be patched for free, so there is no real use.

First you need to upgrade the EROM CID to 52: connect the phone to XS++ v3.1 and when it ask you if you want to upgrade the CID, press the YES button.

Download a CID52 firmware(ex. K800_R1ED001_MAIN_GENERIC_WI_RED52.mbn), and follow the tutorial in first post of this thread(the DB2020 CID52 section).