Remove SIM-lock patch generator

[ahmeer]

My Firmware Version is R1CD001 should i upgrade it to K800_R8BA024_MAIN_GENERIC_WI_RED52 b4 i run the simlock on it

[NKTA]

Hi people
Thank you for this tool.
But could you support it for k610i model R1CB001_CID49, i have tried to unlock it but this little prog claims the file is corrupted and i have read on your forums that is a little bug.
Here's a link for main generic http://www.share2flash.com/index.php...lENDkvTUFJTi8=
Thx

[ahmeer]

I did this procedure step by step & the out come was "Configuration error. Please contact your network operator or service centre" what should i do ???

[kendo2748]

kendo2748:
If it worked before unlocking, then probably it is a software problem. The K800_R1JC002_MAIN_GENERIC_WI_RED52 is an old firmware. Try to find some new firmware (R8xxxxx) like K800_R8BF003_MAIN_GENERIC_WI_RED52, and flash it(but just the MAIN).

Thanks Simonx, whats the best way to flash the newer firmware, XS++ or Setool, is there a guide how to do it as I am real new to this. Any help gratefully appreciated.

[hotuu61]

tesekkurlr

[NKTA]

kendo2748:
If it worked before unlocking, then probably it is a software problem. The K800_R1JC002_MAIN_GENERIC_WI_RED52 is an old firmware. Try to find some new firmware (R8xxxxx) like K800_R8BF003_MAIN_GENERIC_WI_RED52, and flash it(but just the MAIN).

Hey Simox thx for your work.

Since we can´t create a unlock patch for R1CB001_CID49 is it possible to use another main generic like R1CF001_CID49 or R1ED001_CID49 to create it ?
And then can i use this main to flash the phone ?

My phone is k610i R1CB001 and in the forums all of them recommend to only flash what firmware your phone is. So i'm a little confused ...:confused:

[simox]

NKTA:
I know that bug. The reason I haven't corrected it, is that we cannot apply patches to DB2020 CID49 phones. First you need to upgrade the EROM CID to 52 using XS++. Connect your phone to XS++, and when it ask if you want to upgrade your CID, then press YES. DO NOT use SEUS(Sony Ericsson Update Service), because it will update your CID to 53, and we don't want this. Then download a K610 CID52 MAIN, and try again. It is recommended to use the same MAIN what you have in phone, but you can use newer versions of K610 MAIN as well(it will work, I'm sure).

ahmeer:
You need to upload a custom pack. In XS++ 2.x Guide read the III. Region Codes and CDA/Custpack. In step IV. skip the (do not select any) MAIN or FS. Upload the custom pack only.

kendo2748:
You can use XS++ or SETool2 Lite as well. It is just a matter of taste. Here are some tutorials: XS++ 2.x Guide, Flash your phone using SETool 2 Lite. No matter what tool you use, select JUST the MAIN. At this time you no need to flash the FS nor the custom pack.

[NKTA]

Thx, Simox for your answer.

As soon i can, will try and give you a feedback.

Unfortnaly there isn't none for cid 52 for at least i try to find. If someone can give me a link to it ... Would appreciate.
The only available are
R1JE001

R1JG001

R1KG001

PS:
By the way, thank you also for your work and support you show.
Even that it may not work, its good to have someone to help us !

[NKTA]

Thx.

Well my phone is updated to cid52, i forgot to mention that.
But i cant get the cid52 R1CB001 since i havent permission to download (20 posts in 1 months ?). Could someone give it to me in an external link ?
I will then give you feedback if it worked ...

PS:
By the way, thank you also for your work and support you show.
Even that it may not work, its good to have someone to help us !

[simox]

You can use any of those firmwares. Don't worry, it will work ;) .