Remove SIM-lock patch generator

[yurais]

OK, I didnt want to download a MAIN for making the Quixkaccess patch stuff.

SO, I got a VKP for R1JC003 and clicked Bypass CID52, then clicked on FLASH :(

All went well, and asked to patch, I said No to apply the patch, it then told me there were differences and I applied the patch anyways............. - Phone Dead -

I cant restore the GDFS Backup :(
and obviously Removing the patch wont work neither, because it replaces the different stuff from the firmweare with teh stiff in the patch, so,m there is no way to know what was written on the firmware before applying the patch...

Please tell me that if I flash MAIN and FS it will REVIVE the phone !!!
I am downloading anyways, but I would sleep better if someone let me know this will succed.

[simox]

You haven't followed the guide, and now you wonder what happened???
The answer: Your phone is dead of course.
You can revive it if you reflash the MAIN firmware. Then unlock your phone by following CAREFULLY the guide, and do not skip any step because there isn't any pointless step.

[yurais]

I must admit that am sorry...

I thought the quickaccess stuff was only for making life easier later for patching more stuff, so I thought I could just use the bypass mmethof, since I only need to patch this phone once for sure.

Can I use the bypass method with the MAIN firmware and only patch the phone.
I Mean, is there ANY way to apply the patch WITHOUT using the QuickAccess story ?

Yurais

[simox]

You can skip the quick access part, if you don't want to apply other patches in the future, otherwise I don't recommend it.
If you want to skip the quick access:
start with step II. then follow the step I. Here, instead of quick access put the "unlock" patch generated by my tool. Everything else remain unchanged(but you no need to make the quick access patch of course).

[yurais]

Ok, because I had a different version on the phone than the version I could find at iprotebe.cz, this what I did to Unbrick the phone:

(Used Service Cable)
Generated the quick_access Patch with qamaker.
Added both Main and FS to the list, ticked the Bypass checkbox, added the quick_access_patch generated by qa_maker on the Misc textbox, and clicked FLASH
had to wait about half an hour.
All done
Added the Unlock vkp , ticked Use QUick Access Patch, cleared both MAIN and FS from the list, unticked B?ypass db2020 ..., clicked Write Script.
This did NOT work at all using the Service Cable, I had to use the DCU11 Cable (USB Cable) for the write script using quick_access memthod to work.

After all that, because of configuration problem, just openes Xs++ and Finalized the phone.

WalkMan is now back to life.

But I still do have the same question: How can I patch_unlock, WITHOUT using the quick_access stuff, no matter how long it takes.

I think that If I add MAIN, add unlock_vkp_script, tick Bypass DB2020... and click on FLASH it Should Work, SIMOX ??

[yurais]

You can skip the quick access part, if you don't want to apply other patches in the future, otherwise I don't recommend it.
If you want to skip the quick access:
start with step II. then follow the step I. Here, instead of quick access put the "unlock" patch generated by my tool. Everything else remain unchanged(but you no need to make the quick access patch of course).

and can I patch the generated VKP for unlock, avoding the quick access, and also without having teh MAIN file ?

Actually I believe that what screwed the phone was an Incorrect Patch, becase as I said, setool2lite warned of Differences on the patch against the FIrmware andn applied it anyways, this, MUST be what sucked the phone so hard.

Simox thanks for your replies, but I think this conversation will serve to many guys, I used to unlock db2020 with seking, I have been forced to mmove to the free stuff because I am having problems with paypal right now, and can not make payment, so, forced to use the free zone ;), thats why I am a newbie on the patching story

[etel]

Hi,

I am trying to reomve the SIMlock in my k800i.
I followed the instruction, but qamaker does not automatically generate a quick_access_xxx file.

can some body please help.
My firmware verion is K800_R1GB001_MAIN_GENERIC_WI_RED52.mbn
thanks in advance
Sl

[simox]

But I still do have the same question: How can I patch_unlock, WITHOUT using the quick_access stuff, no matter how long it takes.

Read my previous post ;)

I think that If I add MAIN, add unlock_vkp_script, tick Bypass DB2020... and click on FLASH it Should Work, SIMOX ??

Yes it will work in this way.

etel:

I followed the instruction, but qamaker does not automatically generate a quick_access_xxx file.

I need more information about this. It doesn't automatically generate??? Sorry, but this sentence has no sense...

[yurais]

Ok SImox, got it, and LAST Question: If I dont have the FIrmware and I do have the vkp_unlock_patch for the firmware running on the phone, can I ? Bypass db2020, add vkp_patch too MISC anf click FLASH ? would this work ? without the FIRMWARE FILE ?

it works this way for DB2010 or db2012, I unlocked a K310i this way, only with the vkp patch, not sure here on db2020 if it would work with bypassing.. you are the master, you say...

[simox]

DB2020 phones cannot be unlocked without MAIN firmware. You must add the MAIN file, otherwise it will not work. The MAIN can be other version as well. No need to be the same version as your current version.