i dont have a MAIN firmware file
do i need to download or soemthing?
sorry for constant questions
i dont have a MAIN firmware file
do i need to download or soemthing?
sorry for constant questions
here the log
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit Index of ./ and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:01127100129677 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:01127100129677 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
HOLD "C" BUTTON AND ATTACH PHONE
CID52 BYPASS PROCEDURE FINISHED
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\Xhui\My Documents\Sony w580i\qamaker\W580_R8BA024_MAIN_HONG_KONG_LA_RED52 .mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\Xhui\My Documents\Sony w580i\qamaker\quick_access_W580_R8BA024.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45C40000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:1498 secs.
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit Index of ./ and buy FULL.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:51 PAF:1 IMEI:01127100129677 CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Starting to process VKP patch script: C:\Documents and Settings\Xhui\My Documents\Sony w580i\SIMLockPatchGen\vkp\Remove_SIM_lock_W580_R8B A024.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:27 secs.
just unlocked phone special thanks to simox for his program justme and the windows tweaker
thanks guys :D:D:D
xhui
Sorry for late reply...
It seems that not the patching is the problem. Reflash completely your phone(MAIN, FS, custom pack) and unlock it again.
batesy3
I'm glad you succeded :)
Thank alot! it works :D
The guide is very helpful.
Thanks alot! Managed to unlock my (already unlocked before) T-Mobile W850i after successfully f*cking it up whilst trying to patch it!
Again, thanks a lot :D Didn't know this was possible without special software / cables.
@simox I try to unlock Z310, but:
![]()
Platform and cid of sony ericsson phones
This platform is not supported yet ( at the moment you can apply patches to DB2000/DB2010 CID36/49 and DB2020 CID52 platforms only. )
Nice day
Just wanted to let you know that I did manage to unlock a SE K610I following yr instructions.. Thks..
i will try to unlock my w880
but i dont have a flash file
help me
There are currently 11 users browsing this thread. (0 members and 11 guests)