Remove SIM-lock patch generator

[bennyboi45]

Is it possible to patch a K800i from vodafone, and unlocking it so i can use an orange sim?

[simox]

Yes it is possible.

[joca]

[QUOTE=simox;64693]I think you made something wrong. Follow this tutorial: How to apply patches with SETool2 Lite V1.11 [QUOTE=simox;64693]

I've followed it several times, all failed at some stage.
I am going to give up. :o
It is beating my brains out :eek:

[simox]

I think you made something wrong. Follow this tutorial: How to apply patches with SETool2 Lite V1.11

I've followed it several times, all failed at some stage.
I am going to give up. :o
It is beating my brains out :eek:

Don't give up;)
First flash your phone (MAIN, FS, cust pack) with XS++. Do not flash it with SETool2 lite, just patch it following that tutorial. Should work...

[joca]

Had just finished flashing phone with XS++.
Done all as per guide. Phone still is locked (EXTENDED LOCK)

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35471601933121 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:35471601933121 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\Boss\Desktop\K800_R8BA024_MAIN_GENERIC_WI _RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\Boss\Desktop\SETool\qamaker\quick_access_ K800_R8BA024.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45C80000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:766 secs.

:( :( :( :(

[simox]

ok, so you put the quick access. Now you need to put the unlock patch generated by my tool:
First generate an unlock patch. Run my tool, select the MAIN firmware(K800_R8BA024_MAIN_GENERIC_WI _RED52.mbn) and press Make patch button.
In SETool2 Lite select your phone type, tick 'Use "quick access" patch' checkbox, select the generated unlock patch(Remove_SIM_lock_K800_R8BA024.vkp) in Misc files and click Write SCRIPT button.

[joca]

Where is your tool?
I've been trying with qamaker that came with SeTool2.

[simox]

Where is your tool?

:D Check the first post of this thread. Download the version 2.1.

I've been trying with qamaker that came with SeTool2.

That is the quick access patch generator, and you already put it. My tool is Remove SIM-lock patch generator

[joca]

Have downloaded again, i'd lost it in a sea of downloads all over my computer.
Will try it tomorrow.

Thanks for your help ;)
I'll have to buy you a beer sometime :rolleyes:

[ts013]

Oh yes, I'm waiting. You don't just need to buy us one, but also deliver it.
That'll be a nice trip through europe :D

Errmm...wait, I didn't even help you in this topic...damn....