Remove SIM-lock patch generator

[joao_ladei]

tested on k610 R1GB001 and it works great :):):):):)
i have 2 unlocked phones now thanks simox :)

[mackydon]

iv tested this for w810, k530, k610 & w660 firmware, all work fine :D

[dan409]

Tested it on w580i with original firmware and worked GREAT !!! I didn't have to flash the phone first with the generic MAIN CDA and FS files !!! You are the MAN Simox..

All 5 locks are ulocked !!! Thanks for your work!

Selected firmware: C:\w580i\flashfiles\W580_R8BA024_MAIN_GENERIC_LA_R ED52.mbn
Analyzing firmware...
BABE header found and seems ok.
Flash Platform: DB2020
Flash CID: 52
Flash Color: Red
Base address: 44140000
Generating raw firmware...
Firmware generated.
Searching for required addresses...
Addresses found.
Generating vkp patch...
"C:\SimUnlockgen\SIMLockPatchGen\vkp\Remove_SIM_lo ck_W580_R8BA024.vkp" patch file created.
FINISHED.

[Ja$]

Can anyone help me? Setool has been running for a bout 5 hours now, still stuck on 'Going to execute VKP script' shall I press stop and start again? This is almost like bruteforcing =/ I am trying to unlock a k610 R1CB001

[joao_ladei]

Can anyone help me? Setool has been running for a bout 5 hours now, still stuck on 'Going to execute VKP script' shall I press stop and start again? This is almost like bruteforcing =/ I am trying to unlock a k610 R1CB001

did you upgrade to cid first??

[Ja$]

Yes I upgraded it with XS++ to CID 52

[simox]

There is something wrong because 5 hours are too much. I hope you backed up your GDFS. Do you use DCU-60 cable? Do you installed the USB flash driver that comes with SETool2 Lite v1.10/v1.11?
I think you can start again. If it doesn't works use jdflasher. Don't know why, but SETool2 Lite doesn't works for some people...

[Ja$]

I am using the USB cable that came with the phone (DCU-60) I have the USB Flash drivers installed from a very long time ago (not the ones that come with SETool2 Lite v1.11, do I need to tick bypass db2020 security and use quick access patch? And how do I use jdflasher with far manager, I have opened it using alt+f2, but how do i apply the patch?

[dxxbro]

is there really NO free way of patching a db2010/2012 cid52 phone?
the patch-gen works great, but i can't get the vkp into my w200.

[vojar]

Well, the first problem can be solved if you use jdflasher instead of SETool2 Lite(it is a SETool2 Lite bug????). The second problem is that the flashing failed(so it is normal that your phone doens't turn on), because your FS is probably corrupted. So first reflash your phone completely(MAIN, FS, cust pack) with XS++, because it is easier to do with it. Then you can try again with SETool2 Lite, but probably it will fail again, so use jdflasher instead...

Tanks for the help, but I solve the problemin on this way, first I brought it back to life with SESU. :D, but I decide to try again and now my phone is unlocked!!! :D tanks for every thing

the mistake was that I wasn't put the MAIN on the field of files, but I was puting that on the field of firmeware upgrade!!! :p

and tanks again!!!:)