Remove SIM-lock patch generator

[xulos]

that mean that i cannot unlock it? is it possible that the reason is cell is branded ?shpuld i denbrand it first then try unlock it ?

[simox]

that mean that i cannot unlock it? is it possible that the reason is cell is branded ?shpuld i denbrand it first then try unlock it ?

At the moment you cannot unlock it for free, even if you debrand it.

[mackydon]

First of all this tool isn't fake, just because doesn't work with w610 MAIN. Like I said in first post, it is in beta stage, and may contain bugs. Please post the log(there is a log.txt file along with SIMLockPachGen.exe)...

By the way at the moment you can apply patches to DB2010 CID49 platform only.

This definately isnt fake i used it to unlock my v630(which has w660 firmware)
i generated a w660 unlock patch from the main firmware(mbn)

This worked fine with Far manager(with jdflasher plugin). But it didnt work with at all with setools lite. Far manger is better for patching!!

you can unlock any cid49/51/52 - db2010 or db2020 as long as you can find a working unlock patch and apply it with far managers jdflasher plugin

i have no clue about db2012 tho...

[interferej]

myebe you cannot unlock your mixed v630/w660 with patch...try to do with a "normal" main for v630...bdw it work correctly with my k550/w610...Meybe somethink is wrong with main w660 in v630 some incompatibles

[vojar]

It isn't PhoneXS++ just XS++;)
You can backup the GDFS with SETool2 Lite too. Select the phone model and click on Read GDFS (be careful, press the right button) and follow the instructions. But you can use XS++ as well.



This cannot be done without MAIN firmware. Read this tutorial How to apply patches with SETool2 Lite V1.11.

Tanks for the intruction. so I did what was wrote on the topic, but when the SETOOL2lite was writing the srcipt who was generated with the qamaker. it show me a message like "some patch value diferet". the a click no a my phone wasn't turning on, so a just reflash the main without the script and the phone is still don't turnig on :confused:
what is wrong?? there are the two logs who was generated:

first log:
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:XXXXXXXXXXXXXX CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:XXXXXXXXXXXXXX CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
Going to execute VKP script....
Starting to process VKP patch script: C:\Users\Gustavo\Desktop\setool2lite1.11www.se-tuning.net\qamaker\quick_access_K550_R6BC002.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45A00000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Elapsed:525 secs.



second log:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:XXXXXXXXXXXXXX CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:XXXXXXXXXXXXXX CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
CSloader version:
DB2020_FILESYSTEMLOADER_FOR_SETOOL2
loader startup: executed
wrong response, break.
loader fs startup failed, that is fatal
Elapsed:508 secs.

[Shitblast]

Same result. Still "Inactive SIM." This time's SEtool-output:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:49 PAF:1 IMEI:35240101272487 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\Administrator\Desktop\W850_R1KG001_MAIN_G ENERIC_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\Administrator\Desktop\Remove_SIM_lock_W85 0_R1KG001.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44740000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:644 secs.

[GinnCorvus]

Same result. Still "Inactive SIM." This time's SEtool-output:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:49 PAF:1 IMEI:35240101272487 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\Administrator\Desktop\W850_R1KG001_MAIN_G ENERIC_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\Administrator\Desktop\Remove_SIM_lock_W85 0_R1KG001.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44740000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:644 secs.

The "Inactive SIM" is NOT "Insert corret usim"!! This patch remove the SIM Network lock and NOT USIM-Lock feature of H3G Network!!
You can use only the 3-usim provided with the phone. Olny after few months you can use other usim of the same network H3G.
Try another SIM of other Network, (exe. Vodafone..) and working... :D

[Shitblast]

There a way to kill a USIM-lock?

[simox]

Tanks for the intruction. so I did what was wrote on the topic, but when the SETOOL2lite was writing the srcipt who was generated with the qamaker. it show me a message like "some patch value diferet". the a click no a my phone wasn't turning on, so a just reflash the main without the script and the phone is still don't turnig on :confused:
what is wrong??

Well, the first problem can be solved if you use jdflasher instead of SETool2 Lite(it is a SETool2 Lite bug????). The second problem is that the flashing failed(so it is normal that your phone doens't turn on), because your FS is probably corrupted. So first reflash your phone completely(MAIN, FS, cust pack) with XS++, because it is easier to do with it. Then you can try again with SETool2 Lite, but probably it will fail again, so use jdflasher instead...

[Shitblast]

I've checked the lock-status of my phone through "services" and then "SIM-lock." All five padlock-icons are shown as unlocked. I just now tried flashing with jdflasher, just to try, but still get the same error-message after entering PIN: "Inactive SIM," and a phone-handle with a bar over it.