Remove SIM-lock patch generator

[khli2001]

i saw somthing important

"i STRONGLY recommend use LATEST usbflash drivers (included in distributive) and use ONLY dcu60 for cid52 bypass."

my phone is cid 51 how can i upgrade

[norberto_]

i saw somthing important

"i STRONGLY recommend use LATEST usbflash drivers (included in distributive) and use ONLY dcu60 for cid52 bypass."

my phone is cid 51 how can i upgrade

Upgrade to CID52:
Use Phone XS++ 3.1 (darvin)
Instructions:

1. Launch Phone XS++ 3.1 (Darvin)
2. Press Connect Button
3. HOld "C" button on the phone and connect the phone
4. If the phone is not CDI52 the Phone XS++ will ask you to upgrade it.
Would like XS++ to update your EROM CID to 52?
*Please note - This can be undone!* --> press Yes button.
5. Wait until the procedure finish.


WBR. Norberto_

[khli2001]

Upgrade to CID52:
Use Phone XS++ 3.1 (darvin)
Instructions:

1. Launch Phone XS++ 3.1 (Darvin)
2. Press Connect Button
3. HOld "C" button on the phone and connect the phone
4. If the phone is not CDI52 the Phone XS++ will ask you to upgrade it.
Would like XS++ to update your EROM CID to 52?
*Please note - This can be undone!* --> press Yes button.
5. Wait until the procedure finish.


WBR. Norberto_

after is done the phone still cid 51 nothing change

[norberto_]

after is done the phone still cid 51 nothing change

Please post the LOG from the Phone XS++! So we can see if there is a problem.

[manjak]

Hmm it seems that I have a big problem. Like I said before, everytime I try to apply patch setool gives me message "some patch values differs" and after that my phone (k550i) is dead. I tried with R8BA024, R6BC002, I even flashed my phone to w610i and then tried to patch it with w610i patch but it was the same. What is more, I tried to apply a quick access patch (on a clean firmware) and setool gave mi that fu:mad: message again... :( Is there something wrong with my phone or am I doing something wrong? I followed your instructions carefully... Please help.