Remove SIM-lock patch generator

[george26br]

can do this on CID53???

www.simox-se.co.cc: Remove SIM-lock patch generator v2.2 - Latest version

Change log:
New: Added CID53 support
New: Firmware branding detection (different firmware brandings are distinguished in vkp patch files and in their names)
Improved: Modified the GUI a little
Improved: Vista compatibility (no more UAC for e.g.)
Fix: Now can generate vkp patches from DB2020 CID49 firmware files

[hyperion17]

can do this on CID53???

Yes, but using OMNIUS you can unlock easy, fast and permanent your phone.

[joro_]

thanks a million man! its worked for me ......

[remindme2]

Alright.. I followed all these steps until you ask for the main firmware (.mbn) which is needed to apply the quick access patch to phone.. but I don't have this file on my computer and I don't know how to get it, can anyone help me please? And then you need it again, later, to generate an unlock patch.. I tried my best but I don't seem to manage it without help.

[hyperion17]

If you don't manage to unlock it permanently with OMNIUS:
http://www.topsony.com/forum/unlocki...tml#post134973, we will help you to unlock it by patch with Setool.

[madyotto]

w660I PLEASE HELP

hi am new 2 site and unlocking phone but not quite a noob as have softmodded several wii,s and xbox360 ect. im just heaving hard time with this lol if my question has already been answered then sorry as 150 pages i thought not 2 read them all lol

but i am having major problems with understanding how to install cda pack on phone i also keep getting strange error code when patching

log from my last and most susses full patch still error though

Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35715501###### CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
only FLASH operation supported in that mode
Elapsed:25 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds ! (THIS IS THE ERROR I GET FROM A FEW DIFFERENT OPS)
Elapsed:48 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35715501257531 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:35715501###### CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:2019
Flash props sent ok
writing C:\Documents and Settings\god\My Documents\Downloads\New Folder\W660_R6BC002_MAIN_GENERIC_FY_RED52\W660_R6B C002_MAIN_GENERIC_FY_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\god\My Documents\Downloads\SeTool_2_Lite_v111\setool2lite _1.11\qamaker\quick_access_W660_R6BC002.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45C00000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:708 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:51 PAF:1 IMEI:35715501###### CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Starting to process VKP patch script: C:\Documents and Settings\god\My Documents\SIM-Lock Patch Generator\vkp\Remove_SIM_lock_W660_R6BC002_GENERIC .vkp
VKP script loaded OK. Lines: 5
Patch structure created OK. Determining blocks to read...
New block #0000 added: $00000000
New block #0001 added: $D7B00000
New block #0002 added: $07400000
New block #0003 added: $2CE40000
New block #0004 added: $00400000
New block #0005 added: $636C0000
New block #0006 added: $73740000
New block #0007 added: $53200000
New block #0008 added: $676C0000
New block #0009 added: $5C640000
New block #000A added: $4C2C0000
New block #000B added: $61500000
New block #000C added: $65440000
New block #000D added: $6F740000
New block #000E added: $5C700000
New block #000F added: $65740000
New block #0010 added: $6C5C0000
New block #0011 added: $36540000
New block #0012 added: $42340000
New block #0013 added: $475C0000
New block #0014 added: $43480000
New block #0015 added: $30300000
New block #0016 added: $43300000
New block #0017 added: $34440000
New block #0018 added: $30340000
New block #0019 added: $32400000
New block #001A added: $32300000
New block #001B added: $6F440000
New block #001C added: $70280000
New block #001D added: $6F6C0000
New block #001E added: $4D480000
New block #001F added: $20680000
max block number exceeded (32) (THIS ALSO WORRIES ME BUT IM DON'T NO IF IT IS HOW IT MEANT 2 BE)
Elapsed:39 secs.

stats from setool2 1.11

I have a feeling it is just that i have missed custom cda files as i don't understand how 2 apply them with xs++ or setool2
there is option 2 use custom cda but where do i put files as after selecting phone model and clicking custom cda then in cda box there is only custom cda 2 select i suspect that cda files have 2 be i a certain folder in a certain way but how and what dose it need 2 be named - placed

this phone would have 2 be Hutchinsons 3g they r a pi$$$ t@ke lol
sure ppl have had same problems
my os is xp sp3
all the thanks in the world need HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[riders4sia]

w660I PLEASE HELP

hi am new 2 site and unlocking phone but not quite a noob as have softmodded several wii,s and xbox360 ect. im just heaving hard time with this lol if my question has already been answered then sorry as 150 pages i thought not 2 read them all lol

but i am having major problems with understanding how to install cda pack on phone i also keep getting strange error code when patching

log from my last and most susses full patch still error though

Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35715501###### CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
only FLASH operation supported in that mode
Elapsed:25 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds ! (THIS IS THE ERROR I GET FROM A FEW DIFFERENT OPS)
Elapsed:48 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35715501257531 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:35715501###### CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:2019
Flash props sent ok
writing C:\Documents and Settings\god\My Documents\Downloads\New Folder\W660_R6BC002_MAIN_GENERIC_FY_RED52\W660_R6B C002_MAIN_GENERIC_FY_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\god\My Documents\Downloads\SeTool_2_Lite_v111\setool2lite _1.11\qamaker\quick_access_W660_R6BC002.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45C00000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:708 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:51 PAF:1 IMEI:35715501###### CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Starting to process VKP patch script: C:\Documents and Settings\god\My Documents\SIM-Lock Patch Generator\vkp\Remove_SIM_lock_W660_R6BC002_GENERIC .vkp
VKP script loaded OK. Lines: 5
Patch structure created OK. Determining blocks to read...
New block #0000 added: $00000000
New block #0001 added: $D7B00000
New block #0002 added: $07400000
New block #0003 added: $2CE40000
New block #0004 added: $00400000
New block #0005 added: $636C0000
New block #0006 added: $73740000
New block #0007 added: $53200000
New block #0008 added: $676C0000
New block #0009 added: $5C640000
New block #000A added: $4C2C0000
New block #000B added: $61500000
New block #000C added: $65440000
New block #000D added: $6F740000
New block #000E added: $5C700000
New block #000F added: $65740000
New block #0010 added: $6C5C0000
New block #0011 added: $36540000
New block #0012 added: $42340000
New block #0013 added: $475C0000
New block #0014 added: $43480000
New block #0015 added: $30300000
New block #0016 added: $43300000
New block #0017 added: $34440000
New block #0018 added: $30340000
New block #0019 added: $32400000
New block #001A added: $32300000
New block #001B added: $6F440000
New block #001C added: $70280000
New block #001D added: $6F6C0000
New block #001E added: $4D480000
New block #001F added: $20680000
max block number exceeded (32) (THIS ALSO WORRIES ME BUT IM DON'T NO IF IT IS HOW IT MEANT 2 BE)
Elapsed:39 secs.

stats from setool2 1.11

I have a feeling it is just that i have missed custom cda files as i don't understand how 2 apply them with xs++ or setool2
there is option 2 use custom cda but where do i put files as after selecting phone model and clicking custom cda then in cda box there is only custom cda 2 select i suspect that cda files have 2 be i a certain folder in a certain way but how and what dose it need 2 be named - placed

this phone would have 2 be Hutchinsons 3g they r a pi$$$ t@ke lol
sure ppl have had same problems
my os is xp sp3
all the thanks in the world need HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

just about the CDA file, you need to select the custom pack in zip format (don't need to extract it, just use as it is).

[madyotto]

thanks for useful info (BUT I DID ASK HOW 2 USE IT IN XS U CANT BROWSE FOR CDA AN THERE IS NONE IN DROP DOWN BOX)try sticking to answering questions that were actually asked like file location an name for xs 2 register it thanks for your time but need more explaining



but how do i use with xs++ eg. what dose zip need 2 be called for xs to recognize it or where dose it need 2 be i do not no how 2 select the custom cda in xs as all is in drop down box is own_cda confusein looked for like 8 hour on how 2 load cda in xs it dosent tell me any where

[madyotto]

HELP ME PLEASE

need 2 use custom pack in xs++ and i don't no how where dose zip/rar go dose it need a specific name


the whole intternet and no answer out there for this that i could find answer is probs in last 150 pages but im dislexic and dont read very well there would be whole new range of phones out by time i read them all

[hyperion17]

What specific language are you using ?
Top Sony Forums - Languages Description