Remove SIM-lock patch generator

[Fmyfriend]

I did make a GDfs save file. but i dont know really how to reverse it.. I think i have to use setool. and under the MISC button direct it to the saved gdfs file right... Bahh this was quite hard to unlock.

[hyperion17]

I did make a GDfs save file. but i dont know really how to reverse it.. I think i have to use setool. and under the MISC button direct it to the saved gdfs file right... Bahh this was quite hard to unlock.

You should not write GDFS if it's not corrupted. Reflash ONLY the MAIN as I told you before, with "2+5" and your phone will be OK.

[zloxxx]

hi i aplied your patch on k550 db2020 cid 52 and it works great,but now i have another prioblem,dont know is it because of the patch or...so i must ask:)
now it works with another sim but sometimes people can't get me or send me a message like i'm unavailable,but my network on mobile shows full,and when I try to call then everybody can get me,but I don't receive a message about missed calls..Do you have an idea what is wrong

[cristina_p]

Hi guys...

I'm having a strange issue with a friend's K800... It's cid52 db2020 red
This is not the first time I unlock a phone with vpk patch, but it seems I just can't get it right.

So, I have flashed a new unbranded main + FS to the phone, and made vpk unlock patch and rest file according to my main.
The phone works great with the untouched firmware, but once i patch it and flash the rest, it just won't power on. I'm using seToollite for all this.

I'm sure I'm doing something wrong somewere, so if someone could just point me to it, it would be great.


Thanx

[cristina_p]

Really don't understand where i'm going wrong
I tried again, with a k810 firmware this time, same situation
Didn"t get the "restauration file not present" thing, and created the vpk patch from the main i flashed. this is the log with evrything i did:

[CODE]Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
 
if you like LITE edition - please visit www.setool.net and buy FULL.
 
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501695451 CERT:RED
FLASH CID:52 COLOR:RED
Abort all operations.
Loader not responding !
Elapsed:36 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:21 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501695451 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing E:\PentruTelefon\SONY_ERICSSON\Firmware\K810\K810_R8BA024_MAIN_GENERIC_SM_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
writing E:\PentruTelefon\SONY_ERICSSON\Firmware\K810\K810_R8BA024_FS_MEDITERR_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:4420
Will flash 221 blocks...
SSW loading returns:0
Elapsed:353 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501695451 CERT:RED
FLASH CID:52 COLOR:RED
 
Model:K800i
Brand:Sony Ericsson
MAPP CXC article: R8BF003     prgCXC1250210_GENERIC_WI
MAPP CXC version: R8BF003
Language Package:CENT_EUROPE
CDA article: CDA102568/4
CDA version: R8A
Default article: cxc1250490
Default version: R8BF003
 
Network LOCKED
Operator: 226-10
 
Elapsed:10 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501695451 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Going to execute VKP script....
Enable alternative security bypass !!!
Starting to process VKP patch script: C:\Users\Cristine\Documents\SIM-Lock Patch Generator\vkp\Remove_SIM_lock_K810_R8BA024_GENERIC.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44740000
Blocks selected OK. Reading blocks: 1
Block @ $44740000 read error. Have only: 00000000 bytes
Elapsed:64 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501695451 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
 
CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501695451 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
 
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
 
HOLD "C" BUTTON AND ATTACH PHONE
 
CID52 BYPASS PROCEDURE FINISHED
 
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
Going to execute VKP script....
Starting to process VKP patch script: C:\Users\Cristine\Documents\SIM-Lock Patch Generator\vkp\Remove_SIM_lock_K810_R8BA024_GENERIC.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44740000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:369 secs.[/CODE]

Any ideeas?

[riders4sia]

first apply quick access patch and then simlock patch, please read the tutorial carefully and follow instruction without missing a step

[ARBADEN]

How unlock se t303 for read sim cosmote for greece?

[hyperion17]

How unlock se t303 for read sim cosmote for greece?

T303 it's a "LOCOSTO" phone, therefore you can't unlock it for free (if you don't have a service tool).

[alangpower]

Hi,

I have a W880 that is locked to Orange, but I wish to re-use it on o2. I read somewhere about needing an Orange sim to access to the menus so I got hold of a pay as you go to enable me to do this.

I have tried the various methods for breaking, flashing & patching using jdflasher but always falls down at the point where I have to run the executor - it just opens up a text editor and does not turn the phone off.

The files I have used are executor.jar & customize_upgrade.xml from db2020 and executor.b from the R8BA024 folder of W880 within ANYCID, also W880_R8BA024_MAIN_GENERIC_AI_RED53.mbn.

I have also created a quick access patch and a remove simlock patch, but have not got as far as this yet due to the executor problem.

What am I doing wrong? I have repeated all the steps numerous times over and now can't see the wood for the trees. Any advice wouldbe gratefully received!

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35777401261826 CERT:RED
FLASH CID:53 COLOR:RED

Model:W880i
Brand:Customized
MAPP CXC article: R8BA024 prgCXC1250640_GENERIC_AI
MAPP CXC version: R8BA024
Language Package:EUROPE_2
CDA article: CDA102719/44
CDA version: R10A
Default article: cxc1250651
Default version: R8BA024

Network LOCKED
Operator: 234-33

Elapsed:5 secs.

[hyperion17]

Watch this video tutorial :
http://www.topsony.com/forum/video-t...tml#post112515.
Maybe you missed something.