Really don't understand where i'm going wrong
I tried again, with a k810 firmware this time, same situation
Didn"t get the "restauration file not present" thing, and created the vpk patch from the main i flashed. this is the log with evrything i did:


HTML Code:
[CODE]Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
 
if you like LITE edition - please visit www.setool.net and buy FULL.
 
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501695451 CERT:RED
FLASH CID:52 COLOR:RED
Abort all operations.
Loader not responding !
Elapsed:36 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:21 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501695451 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing E:\PentruTelefon\SONY_ERICSSON\Firmware\K810\K810_R8BA024_MAIN_GENERIC_SM_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
writing E:\PentruTelefon\SONY_ERICSSON\Firmware\K810\K810_R8BA024_FS_MEDITERR_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:4420
Will flash 221 blocks...
SSW loading returns:0
Elapsed:353 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501695451 CERT:RED
FLASH CID:52 COLOR:RED
 
Model:K800i
Brand:Sony Ericsson
MAPP CXC article: R8BF003     prgCXC1250210_GENERIC_WI
MAPP CXC version: R8BF003
Language Package:CENT_EUROPE
CDA article: CDA102568/4
CDA version: R8A
Default article: cxc1250490
Default version: R8BF003
 
Network LOCKED
Operator: 226-10
 
Elapsed:10 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501695451 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Going to execute VKP script....
Enable alternative security bypass !!!
Starting to process VKP patch script: C:\Users\Cristine\Documents\SIM-Lock Patch Generator\vkp\Remove_SIM_lock_K810_R8BA024_GENERIC.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44740000
Blocks selected OK. Reading blocks: 1
Block @ $44740000 read error. Have only: 00000000 bytes
Elapsed:64 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501695451 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
 
CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501695451 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
 
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
 
HOLD "C" BUTTON AND ATTACH PHONE
 
CID52 BYPASS PROCEDURE FINISHED
 
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
Going to execute VKP script....
Starting to process VKP patch script: C:\Users\Cristine\Documents\SIM-Lock Patch Generator\vkp\Remove_SIM_lock_K810_R8BA024_GENERIC.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44740000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:369 secs.[/CODE]
Any ideeas?