This is what happends, when i try to flash it.Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit http://www.setool.net and buy FULL.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35852401234277 CERT:N/A
FLASH CID:52 COLOR:RED
set_gdfs_props failed, exiting
Elapsed:7 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:40 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:40 secs.
file can't be found or opened
Elapsed:0 secs.
file can't be found or opened
Elapsed:0 secs.
file can't be found or opened
Elapsed:0 secs.
file can't be found or opened
Elapsed:0 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35852401234277 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Abort all operations.
file block nak,err:C3
CID52 BYPASS PROCEDURE FINISHED
Elapsed:77 secs.
Abort all operations.
Can't load ID loader !
Elapsed:25 secs.
its stops in the middle of the process?? and i hear a *dingdong* like when your puting in the usb cable or putting it out. :S