Remove SIM-lock patch generator

[riders4sia]

after doing everything you said my w580i is not unlocked although cant find quick access patch checkbox and this is what im getting when i run the script any help would be very much appreciated Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35651402830088 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Starting to process VKP patch script: C:\Documents and Settings\paul\My Documents\SIM-Lock Patch Generator\vkp\Remove_SIM_lock_W880_R8BE001_GENERIC .vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44740000
Blocks selected OK. Reading blocks: 1
Block @ $44740000 read error. Have only: 00000000 bytes
Elapsed:14 secs.

use setool2lite v1.11 and apply qucik access first. your problem is with the quick access, you have not apply it yet. download setool v1.11 and you'll find "Bypass DB2020 Security", tick this and on the Add button, select the MAIN file and on the misc... select the quick access patch and click on the flash button, do whatever setool said. after the procedure is successfull, now select Use "quick access" patch and on the misc... select the vkp file (patch) you want to apply and click on the "Write Script"