Remove SIM-lock patch generator

[simox]

so i thought by load the old gdfs it would go back to the way i had it and i was wrong still locked.

If the phone relocked when you upgraded(flashed) the MAIN, then it was unlocked by patch. There is no use to restore the GDFS if the phone is alive because it will NOT unlock it. You can unlock it again if you follow the DB2020 CID52 unlocking guide in first post of this thread.

[casper663]

If the phone relocked when you upgraded(flashed) the MAIN, then it was unlocked by patch. There is no use to restore the GDFS if the phone is alive because it will NOT unlock it. You can unlock it again if you follow the DB2020 CID52 unlocking guide in first post of this thread.

My phone was unlocked when i tried to upgrade it it locked i can use my t-mobile sim in this phone anymore. I did everything the post told me todo but nothing its still locked. I don't know what i am doing wrong.

@Jasmin

I would like English please.

[casper663]

Model:W580i
Brand:Sony Ericsson
MAPP CXC article: R8BE001 prgCXC1123362_GENERIC_LA
MAPP CXC version: R8BE001
Language Package:AMERICA_2
CDA article: CDA102568/14
CDA version: R4A
Default article: cxc1123364
Default version: R8BE001

Network LOCKED
Operator: MULTIPLE

Elapsed:1 secs.

i followed the tutorial and still the phone is locked what am i doing wrong

[simox]

Please post that log when you tried to unlock the phone. Have you get a message like some values differ or something like that?

[casper663]

not sure but i will do it again.

[casper663]

now i am getting a configuration error fopr me to contact my service provider. As you can see from my log i followed every step and still nothing.

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI: CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI: CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\clerk\Desktop\Sony Ericsson\W580_R8BE001_MAIN_GENERIC_LA_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\clerk\Desktop\Sony Ericsson\Setool2Lite_v1.10\qamaker\qamaker\quick_a ccess_W580_R8BE001.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45BC0000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:740 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:51 PAF:1 IMEI: CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Starting to process VKP patch script: C:\Documents and Settings\clerk\My Documents\SIM-Lock Patch Generator\vkp\Remove_SIM_lock_W580_R8BE001_GENERIC .vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:15 secs.

can any explain to me what am i doing wrong.

[SeaMonkey]

CONFIGURATION ERROR - Answer is here - Top Sony Forums

[riders4sia]

now i am getting a configuration error fopr me to contact my service provider. As you can see from my log i followed every step and still nothing.

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI: CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI: CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\clerk\Desktop\Sony Ericsson\W580_R8BE001_MAIN_GENERIC_LA_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\clerk\Desktop\Sony Ericsson\Setool2Lite_v1.10\qamaker\qamaker\quick_a ccess_W580_R8BE001.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45BC0000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:740 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:51 PAF:1 IMEI: CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Starting to process VKP patch script: C:\Documents and Settings\clerk\My Documents\SIM-Lock Patch Generator\vkp\Remove_SIM_lock_W580_R8BE001_GENERIC .vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:15 secs.

can any explain to me what am i doing wrong.

that means you didn't finalize your phone

[adshow]

Hello to all
my phone is locked again
its was working good 2 days ago then i upgraded the firmware
then its start showing (inserct correct sim card)
then i flashed it to another firmware and main and fs (see log)
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35464901XXXXXX CERT:RED
FLASH CID:52 COLOR:RED

Model:W880i
Brand:Generic Trade IN
MAPP CXC article: R6BC002 prgCXC1250640_GENERIC_AI
MAPP CXC version: R6BC002
Language Package:M_EAST_N_AFR
CDA article: CDA102719/106
CDA version: R2A
Default article: cxc1250651
Default version: R6BC002

Network LOCKED
Operator: 234-33

Elapsed:1 secs.
__________________________________________________ _

its now locked to Operator: 234-33 (orange uk) ithink

when i flash it with setool lite 1.11 with quick acesss patch
its not starts

then i reflash it with xs++ 3.1 its working good but i can't apply unlock or quick acess patch

plzzz help me soon

[riders4sia]

why don't you read it from the first post before posting. you can try this
Flash your phone and How to apply or remove patch using SETool 2 Lite - Top Sony Forums
it will help for sure and don't forget to use the thanks button