Remove SIM-lock patch generator

[99smiffy99]

i have flashed my k750i to a w800i and
then follow all instructions to unlock
but when i do i get the error message:
"configuration error. Please contact your
network operator or service centre"

please help:confused:

[yurais]

If you use setool lite, you must write a custom pack for phone to get finalized properly.

in the scripts folder there is a file named test.zip, you can use this one for finalize your phone.

regards

i have flashed my k750i to a w800i and
then follow all instructions to unlock
but when i do i get the error message:
"configuration error. Please contact your
network operator or service centre"

please help:confused:

[krazy1957]

i have flashed my k750i to a w800i and
then follow all instructions to unlock
but when i do i get the error message:
"configuration error. Please contact your
network operator or service centre"

please help:confused:

I flashed my K800i, and unlocked it.
What I did was to custom change the CDA code when I flashed the fs file, or ensure you have choosen the right region fs file.

I used: Simlockpatch gen v2.1, and XS++ v3.2 plus setool2lite v1.10

Maybe this thread may help!
http://www.topsony.com/forum/cmps_in...?page=CDA_K800

[SeaMonkey]

@Fmyfriend

When you hit connect in XS++,press C button on phone and than connect USB cable - if that don't work - try to change USB port and clean conector on phone - if that don't work try to reinstall flash drivers


@99smiffy99

It's doesn't matter what tool you use - you must finalize flashing with CUSTPACK, but CUSTPACK must be same region like FS (so if you use FS - EUROPE_2 - than CUSTPACK must be for EUROPE_2). Just look here XS++ 3.1 Guide-Flashing, Customizing, Recovering - Top Sony Forums SECTION 4