Remove SIM-lock patch generator

[SeaMonkey]

first off: thanks a lot simox for the quick response.
everything went well until the last step. as you write "3. Tick Use "quick access" patch checkbox" - my set v1.10 doesn't seem to have that checkbox? or are you talking about "quick_access_XYYY_R8BA024.vkp" (which i dl'ed somewhere!?)?

i am receiving this status:

Starting to process VKP patch script: G:\SIMLockPatchGen\vkp\Remove_SIM_lock_W880_R8BA02 4.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44740000
Blocks selected OK. Reading blocks: 1
Block @ $44740000 read error. Have only: 00000000 bytes
Elapsed:9 secs.

First of all find v.1.11 and than try again (thats last version for now)

[danbwoi]

omg, and i have always seen myself as a not-dumb-user, thanks anyways seamonkey. anyone who wants to slap me, pm me.

___________________

STILL it doesn't work. it's failing while trying to launch the embedded bootloader -> embedded flashloader not responds!

[SeaMonkey]

omg, and i have always seen myself as a not-dumb-user, thanks anyways seamonkey. anyone who wants to slap me, pm me.

___________________

STILL it doesn't work. it's failing while trying to launch the embedded bootloader -> embedded flashloader not responds!

Just try to connect with XS++3.1 and if XS recognized and read your phone post log here without IMEI

[danbwoi]

22:25:46| Baseband ID: 9900
22:25:46| Protocol Version: 3.1
22:25:47| Phone name detected!
22:25:47|
22:25:47| Profiling SEMC phone...
22:25:47| Platform: DB2020
22:25:47| OTP CID: 51
22:25:47| EROM CID: 52
22:25:47| EROM Color: Red
22:25:47| IMEI: xxxxxxxxxxxxx
22:25:47| Phone ID: W880
22:25:47| Region: VFE_LIVE_2
22:25:47| CDA: CDA102719/75 R5A
22:25:47| Firmware Version: R1JC002
22:25:47| EROM: R3A016
22:25:47| Ready for operation!

[SeaMonkey]

22:25:46| Baseband ID: 9900
22:25:46| Protocol Version: 3.1
22:25:47| Phone name detected!
22:25:47|
22:25:47| Profiling SEMC phone...
22:25:47| Platform: DB2020
22:25:47| OTP CID: 51
22:25:47| EROM CID: 52
22:25:47| EROM Color: Red
22:25:47| IMEI: xxxxxxxxxxxxx
22:25:47| Phone ID: W880
22:25:47| Region: VFE_LIVE_2
22:25:47| CDA: CDA102719/75 R5A
22:25:47| Firmware Version: R1JC002
22:25:47| EROM: R3A016
22:25:47| Ready for operation!

You are trying to put wrong .vkp to your phone (your phone have R1JC002 firmware,but you try to put .vkp for R8BA024)

[danbwoi]

weird, i performed all steps with the raba024.mbn and now it's r1jc002? anyways..i will try it.

okay it doesn't work, most probably coz i did it with the wrong firmware. i will flash it tomorrow with the r1jc002 firmware and then post whether it works or not.

it doesn't work. i flashed it with the r1jc002 mbn, it went well until i wanted to apply the patch (like before).
embedded bootloader -> embedded flashloader not responds!

the phone gets recognized as database and is booting and the display showing the usb-instructions. what do i need to do?