Remove SIM-lock patch generator

[simox]

K800i

Flashed main with XS++ ok
Flashed FS with XS++ ok
Flashed Cust with XS++ ok
cannot get unlock patch icon to work, phone still locked

Flashed main with SeTool2lt ok
Flashed FS with SeTool2lt FAIL

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
CSloader version:
DB2020_FILESYSTEMLOADER_FOR_SETOOL2
loader startup: executed
wrong response, break.
loader fs startup failed, that is fatal
Elapsed:583 secs.

What is going wrong??
I loaded the USB drivers

Just trying to unlock phone

I think you made something wrong. Follow this tutorial: How to apply patches with SETool2 Lite V1.11

seunlock:

hello if i unlock my phone in this way and make a backup and flash it to another phone does that phone be unlocked?

Yes, that phone will be unlocked, but be careful: backup the MAIN firmware only. If you backup the GDFS too, you can brick the another phone.

bennyboy™ and Shitblast:
I have searched a bit about "Inactive SIM" problem.
Try the following:
1.) Swich off the phone, remove the battery and SIM card. Put back the battery(do not put back the SIM card). Turn on the phone, and when it asks you to put a SIM card, swich off the phone and put back the SIM card. This operation is called soft reset.
2.)If it doesn't help reflash the phone with the latest firmware version(try an unbranded one) and try with original SIM card. If it works unlock the phone and try again.
If it doesn't works then can be two reasons: the SIM card is defect or your IMEI number is blacklisted(someone reported the phone as stolen).