Remove SIM-lock patch generator

[precious87]

2. In Windows Explorer drag the MAIN file (.mbn) onto SETool2 Lite v1.11 folder\qamaker\qamaker.exe. In the qamaker's folder you will get a quick_access_XXXX_XXXXXXX.vkp file.

Hi,

ı cannot do the step 2... how can i do a main firmware file... please help me...

[GinnCorvus]

2. In Windows Explorer drag the MAIN file (.mbn) onto SETool2 Lite v1.11 folder\qamaker\qamaker.exe. In the qamaker's folder you will get a quick_access_XXXX_XXXXXXX.vkp file.

Hi,

ı cannot do the step 2... how can i do a main firmware file... please help me...

Download the MAIN file firmware in download area

[GinnCorvus]

2008-04-22 11:12:01
welcome to Remove SIM-Lock patch generator v2.1
supported firmwares: DB2000/DB2010/DB2012/DB2020 CID36, CID49, CID50, CID51, CID52

You can drag firmware files here...

Selected firmware: C:\Documents and Settings\Twitch\Desktop\R1GB001\K800_R1GB001
_MAIN_VODAFONE_WI_RED49.mbn
Analyzing firmware...
BABE header integrity check failed! "C:\Documents and Settings\Twitch\Desktop
\R1GB001\K800_R1GB001_MAIN_VODAFONE_WI_RED49.mbn" firmware is probably corrupted!
FINISHED.

I've downloaded the firmware from about 5 different places, so I know it isn't corrupted firmware....any ideas?

Youn can't use CID49 firmware for db2020! You must upgrade your phone to CID52 and use CID52 firmware to generate the patch unlock.

[marksprigg]

do top sony firmware work with patch maker by sim lock patch generator

[Rudess]

Download the MAIN file firmware in download area

I also have a problem, as I don't have access to downloading files because i'm too new here (doens't have yet 20 messages nor 2 months). Anyone can suuggest me where and how to get these firmwares files that are needed? I have a v630i. Thanks.

[marksprigg]

Goto iProTebe.cz - Sony Ericsson -> firmware -> V630 need to register but it is free not all firmwares though but find most of what i need here.

[Rudess]

Goto iProTebe.cz - Sony Ericsson -> firmware -> V630 need to register but it is free not all firmwares though but find most of what i need here.

Thanks I'll try it!

[Rudess]

Thanks Simox, the patch worked and unlocked my v630i !!!

[precious87]

With SETool2 Lite v1.11.
1. Select your phone model.
2. In Windows Explorer drag the MAIN file (.mbn) onto SETool2 Lite v1.11 folder\qamaker\qamaker.exe. In the qamaker's folder you will get a quick_access_XXXX_XXXXXXX.vkp file.
3. Click on ... (three dots) button near MISC files box, and select the vkp file generated in step 2.
4. Tick Bypass DB2020 security checkbox.
5. Click on Add button and select the MAIN firmware file.
6. Press FLASH button.
7. Follow the instructions given by SETool2 Lite.
8. READ THIS CAREFULLY, it is a little tricky: When a dialog pop-up, click "Yes" to remove the patch. Click "No" to add the patch. In this case click on "No" button.

At one moment you will belive that nothing happens and the status windows is not changing! DO NOT remove the CABLE! Wait until "ELAPSED x SECONDS" appears in status window.

This process will take some time, about 10-15 minutes or more...

Hi i have a question again.. im waiting more than 15 minutes, and still its running and i didnt see any pop-up, if i wont see any pop up what can i do, if i click the stop buttom, is it harmful for my phone?

[simox]

First you need to install the USB Flash Driver: USB Flash Driver Installation - Guide

Click on button what you need/guide sais(Identify, Read GDFS, etc.)...

When SETool2 Lite sais to press the C key and connect the cable you need to:
1. turn off the phone(if it was turned on)
2. remove the battery, and wait a few seconds(2-3 seconds is enough), and put it back, but DO NOT turn it on
3. press and hold the C key on phone and connect the DCU-60 cable
4. when you see some progress on SETool2 Lite status window(on left side) release the C key

GinnCorvus:

Any news about db2012 CID52?

I really have no idea when will be(if will be) available the db2012 patching...