Remove SIM-lock patch generator

[interferej]

simox do you working with CID53??:D

[ts013]

I said this before...and you could have come up with the idea yourself ;)

Even if the patch generator would be able to generate patches for DB3150 phones you couldn't use them. There is no free software that is able to patch DB3150 phones, in fact there's not even free soft to flash those models yet.

[Ch4sethe5u]

I dont know if this is a dumb question or not
and thanks again =]

but how do you create a rest file. because my rest folder only has that rest file you gave me and a program called ssw2rest.

[simox]

Your rest folder should contain more than 180 files... But there is no problem, because you can make it for yourself.

use it as ssw2rest main_firmware.mbn addr
where
addr=44020000 for k750/w800/w700 and
addr=44140000 for all sibley phones (w810,w300,etc)
addr=20020000 for db2000 phones (k600,k608,v600,v800,z800)
addr=200A0000 for db2000 phones (w900)
addr=20100000 for pnx5230 phones (z310)

Here is an example:
ssw2rest W810_R4EA031_MAIN_GENERIC_HN_RED49.mbn 44140000

[ts013]

We've also got loads of rest files in the download area for all you lazy ones out there ;)

[viseth]

Hey guys using the k800 and looking to oupdate to r8bf003, do i have to do whole process all over? or can i just update the firmware? and maybe the FS i forget where to downoad CID from ><

[jasmin]

I think you must make a full flash ( main , filesystem and custom file ).

CID = This "number" defines the version of SE's protection present in the phone.New CIDs are deployed from time to time, for the sole reason of preventing them from beeing unlocked/flashed/tampered with by non-SE service tools. Current CIDs in use by SE are 29/36/37/49/51. SE-based LG/Sharp phones use the same system (but different versions). The OTP (One Time Programmable memory) and EROM of a phone might be protected by different CIDs, usually the case in newer K600s/K608s.

Nice day

[rudie]

I just want to say, this SIMLock Patch Generator is really great. I just unlock my friend W300i. None of the ready made patches I found on the net never work for me not even on my W810i but using the Patch Generator along with the phone main, the phone is unlock 100%. Thank You Simox and keep up the good work.

[yuk]

Hi guys,
Have a strange problem. I upgraded y k610i to W660 and it works fine. After unlocking it with this nice tool, my phone is working OK with some SIMs, but with some others gives me "Emergency Calls Only". When I using "Identify" feature in the SEToll, I"m getting:
"Network LOCKED".
Any ideas?

Thanks!

[simox]

You get "Emergency Calls Only" for e.g. if the SIM operator's network isn't available at your place, and the phone connect to other operator's network. Or maybe you just don't have credit...

When I using "Identify" feature in the SEToll, I"m getting:
"Network LOCKED".

It is normal when a phone is unlocked by patch, because SETool, XS++ etc. read the SIM-lock from GDFS. The GDFS is still locked, but due to patch the phone believe that is is unlocked.