Remove SIM-lock patch generator

[prasannads]

Thanks...

Another good Tool and tutorial here
Sony Ericsson Funclub: Free Unlock Sony Ericsson db2020 Phones

I heard that db2020 patching will be availible in Januari:)

Hey DB 2020 Patching now avaleble
Read this blog

Sony Ericsson Funclub: Tutorial flashing firmware/de-branding/customization with JDflasher.

[Pielie]

Hi,
I unlocked my cellphone, but when I wanted to change the language, he broke down and now I'm not able to turn him on anymore. if I connect him to my computer, he doesn't react either. Can I do something about this? Or is it hopeless?

Can nobody help me?
It is quite urgent.
Thanks

[jasmin]

Change usb port and tried again.

Have a nice day

[riders4sia]

like jasmin said, change the usb port to another, i.e insert the usb port to another usb port to your computer and try again if it works. it may also be dirty fastport, clean it with alcohol or with pencil tip.

[shovon71]

i have tried to unlock with the patch, didn't work. My w810i has simlock 5-closed on it. The log file from Remove SIM soft has following:

welcome to Remove SIM-lock patch generator v2.2
supported firmwares: DB2000/DB2010/DB2012/DB2020 CID36/CID49/CID50/CID51/CID52/CID53
This tool is free, do not pay for it to anybody!

You can drag firmware files here...

Selected firmware: 'C:\Users\shovon\Desktop\W810i\W810_R4CE012_MAIN_G ENERIC_HN_RED49.mbn'
Analyzing firmware...
BABE header found and seems OK.
Generating raw firmware...
Firmware generated.
Getting firmware info...
Firmware info:
Phone Model: W810
Firmware Version: R4CE012
Firmware Branding: GENERIC
Firmware Platform: DB2010
Firmware CID: 49
Firmware Color: Red
Base Address: 44140000
Searching for required addresses...
Addresses found.
Generating vkp patch...
'C:\Users\shovon\Documents\SIM-Lock Patch Generator\vkp\Remove_SIM_lock_W810_R4CE012_GENERIC .vkp' patch file created.
Finished.


I have successfully patched the firmware with setool2lite v.11 but the in the phone the service-simlock status still shows network locked 5-closed. In the Setool2 lite help guide it says that 5-closed network locks can't be patched. is it true?

[hyperion17]

According to @Simox, it should work with phones "where all the 5 padlocks are locked".
Post also the patching log from Setool.

[simox]

@shovon71
Most probably you made something wrong when tried to apply the patch. Like hyperion17 said, post the SETool2 Lite log when you applied the patch.

[shovon71]

THank you for your reply. Here is the log from SETool2 lite log when i applied the patch:-


ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35906300770354 CERT:RED
FLASH CID:49 COLOR:RED

Model:W810i
Brand:Cingular Wireless
MAPP CXC article: R4CE012 prgCXC1250316_GENERIC_HN
MAPP CXC version: R4CE012
Language Package:CINGULAR
CDA article: CDA102494/58
CDA version: R14A
Default article: cxc1250324
Default version: R4EA031

Operator: 000-00

USERCODE:0000

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed:9 secs.
Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35906300770354 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4CE012_CXC1250316_GENERIC_HN
Restore from:R4CE012_CXC1250316_GENERIC_HN
Starting to process VKP patch script: C:\Users\shovon\Documents\SIM-Lock Patch Generator\vkp\Remove_SIM_lock_W810_R4CE012_GENERIC .vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44E00000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:56 secs.


Please help me, i don't know whats wrong , it seems the operation is successful but in the phone service info it says the Simlock 5, network lock 5. Thank you for your time and help

[philzfog]

to fix 5 locks problem u need to have it fully unlock or wright the gdfs back upFROM THAT PHONE ONLY !!!this is the only way to fix it as some how u have erased the locks on it is that how u got it

[simox]

Operator: 000-00

Your phone is already unlocked premanently, so there is no use to patch unlock it, but (like philzfog12 said) this is a GDFS problem...