Remove SIM-lock patch generator

[SeaMonkey]

? i cant flash with se tools lite because is cid 36
se toolbox gives error when starting up(801001D) seems that i need abox with this software
Can somebody point me which way to go now

You can flash your phone with XS++3.1

[SeaMonkey]

? i cant flash with se tools lite because is cid 36
se toolbox gives error when starting up(801001D) seems that i need abox with this software
Can somebody point me which way to go now

You can flash your phone with XS++3.1 and flash first FS than CUSTPACK and in the end MAIN and don't turn on your phone until flashing (full) and if you want unlock phone use this how to patch K750 CID36 RED with FAR - Top Sony Forums

[x800]

Thanks to all the phone is unlocked
:)

[vindi]

hmm... long topic, dont know if it has been discussed yet... but I managed to unlock the phone, and now I'm stuck with "configuration error. Please contact your network operator or service centre"
Phone is k800. What went wrong? just bad firmware or smth?

[SeaMonkey]

hmm... long topic, dont know if it has been discussed yet... but I managed to unlock the phone, and now I'm stuck with "configuration error. Please contact your network operator or service centre"
Phone is k800. What went wrong? just bad firmware or smth?

You didn't complete flashing- for that you need CUSTPACK

[vindi]

err... could you explain a little closer?

Hello. I just need to know, what I have done wrong so far...
Here's my phone's details:
6:44:47| Baseband ID: 9900
16:44:47| Protocol Version: 3.1
16:44:47| Phone name detected!
16:44:47|
16:44:47| Profiling SEMC phone...
16:44:47| Platform: DB2020
16:44:47| OTP CID: 49
16:44:47| EROM CID: 52
16:44:47| EROM Color: Red
16:44:47| IMEI: 35170701xxxxxx
16:44:47| Phone ID: K800
16:44:47| Region: BALTIC
16:44:47| CDA: CDA102511/101 R1A
16:44:47| Firmware Version: R8BA024
16:44:47| EROM: R3A011
16:44:47| Ready for operation!


It was locked and branded by vodafone... i tried to apply different firmwares, R8BC004, R8BC003 and R8BA024... I think I succeeded the flashing, but after applying unblock patch, phone just says "configuration error".
I used xs++ for flashing, and Setool for applying patch.

[tthnkv]

With SETool2 Lite v1.11.
1. Select your phone model.
2. In Windows Explorer drag the MAIN file (.mbn) onto [SETool2 Lite v1.11 folder]\qamaker\qamaker.exe. In the qamaker's folder you will get a quick_access_XXXX_XXXXXXX.vkp file.

This Step don't work, didn't create the file

[simox]

@vindi:
Upload this custom pack with XS++ or SETool2 Lite: HB1-06_Gen_CDA102568_1_R8A_GENERIC_BALTIC

@thnkv:

This Step don't work, didn't create the file

Well, this is a little slight information... Do you have the qamaker.exe? Also do you drag and drop the MAIN firmware(*.mbn) to qamaker.exe's icon? If yes, then you should get the quick_access_K800_R8BA024.vkp file.

[dotybizz]

@vindi
Just follow the instructions I gave you in the readme and the files in the zip you got from my virtual drive. You can replace my tpa with your baltic tpa but make sure you put the system folder from mine into yours and replace my fs with your baltic fs. Then everything should so be ok if you do as the readme. The unlock and quick patch is already generated for the main.

[tthnkv]

Well, this is a little slight information... Do you have the qamaker.exe? Also do you drag and drop the MAIN firmware(*.mbn) to qamaker.exe's icon? If yes, then you should get the quick_access_K800_R8BA024.vkp file.

Yes. I did the same thing, but not thing was created.
I had qamaker.exe and drad and drop the firmware (main firmware (*.mbn) to qamaker.exe icon, but not thing happen.

Thanks