Remove SIM-lock patch generator

[SeaMonkey]

You have wrong file(FS is .fbn) and you need MAIN
one of this files:K800_R1KG001_MAIN_CHINA_WI_RED52
K800_R1KG001_MAIN_GENERIC_WI_RED52
K800_R1KG001_MAIN_HUTCHISON_WI_RED52
K800_R1KG001_MAIN_ORANGE_WI_RED52
K800_R1KG001_MAIN_TAIWAN_WI_RED52
K800_R1KG001_MAIN_VODAFONE_WI_RED52
K800_R1KG001_MAIN_YOIGO_WI_RED52

[Nagamatsu]

You have wrong file(FS is .fbn) and you need MAIN
one of this files:K800_R1KG001_MAIN_CHINA_WI_RED52
K800_R1KG001_MAIN_GENERIC_WI_RED52

Thanks dude. Worked like a charm. I'll pay more attention in future! ;)

[tristan888]

Hi there

I have managed to unlock my w810i (CID: 49). I would like to upgrade the firmware. If I do this, will my phone still be unlocked?

Also, I noticed since unlocking the phone it switches itself off every now and again. What might be causing this?

Thanks
Tristan

[simox]

I would like to upgrade the firmware. If I do this, will my phone still be unlocked?

If you flash/upgrade/debrand the phone, then it will be relocked, so you need to unlock it again.

Also, I noticed since unlocking the phone it switches itself off every now and again. What might be causing this?

Probably this is a software problem. Reflash your phone completely(MAIN, FS, custom pack), and then unlock it. It should work then.

Before reflashing the phone, backup the user data(contact list, pictures, ring tones etc.) from phone's internal memory, because during flash it will be lost.

[yulicapop]

when cid53 pach will be posible?

[SeaMonkey]

when cid53 pach will be posible?

@simox already answer that question - when support tools (XS++,Setool or Far) make possible patching CID53

[wongnog]

Hmmm, running into some small problems. I'm using XS++ 3.1 with the following files:

W810_R4EK001_FS_AMERICA_2_RED49.fbn
W810_R4EK001_MAIN_GENERIC_HN_RED49.mbn
W810_CDA102555_15_R2A_Generic_AMERICA_1 (customization pack)

After flashing/unbranding, my phone turns on okay but when I use your SimLockPatchGen on the R4EK001 Main and flash the script with SETool2, the phone won't turn on. I have to reflash the main the XS++. But do I lose the patch I just flashed?

[SeaMonkey]

Hmmm, running into some small problems. I'm using XS++ 3.1 with the following files:

W810_R4EK001_FS_AMERICA_2_RED49.fbn
W810_R4EK001_MAIN_GENERIC_HN_RED49.mbn
W810_CDA102555_15_R2A_Generic_AMERICA_1 (customization pack)

After flashing/unbranding, my phone turns on okay but when I use your SimLockPatchGen on the R4EK001 Main and flash the script with SETool2, the phone won't turn on. I have to reflash the main the XS++. But do I lose the patch I just flashed?

Yes you will lost patch so - use Setool2lite and put Main + .vkp like on first page this section

[simox]

@wongnog

when I use your SimLockPatchGen on the R4EK001 Main and flash the script with SETool2, the phone won't turn on

It doesn't turn on because the rest(oration) file for your firmware is missing. You need to download the R4EK001_CXC1250316_GENERIC_HN from somewhere, or make one for yourself with [SeToolLiteFolder]\make_rest\ssw2rest.exe, and then copy the generated rest file to [SeToolLiteFolder]\rest\ folder.

[wongnog]

It doesn't turn on because the rest(oration) file for your firmware is missing. You need to download the R4EK001_CXC1250316_GENERIC_HN from somewhere, or make one for yourself with [SeToolLiteFolder]\make_rest\ssw2rest.exe, and then copy the generated rest file to [SeToolLiteFolder]\rest\ folder.

THANK YOU, worked like a charm! Maybe you should put that in the first page as part of the flashing instructions, I don't think it's that clear to ppl like me that have never used SETool2 before. Just to clarify something though, if I were to update camera or sound drivers using FAR Manager + SEFP, I have to reflash the Main so I will lose all patches and have to reapply, am I correct?