Remove SIM-lock patch generator

[Spirit]

Hey there :)

I was just wondering, I followed the exact steps (and actually tried with the MAIN GENERIC and NAM one) on my S500i that is CID52 and it didn't seem to work... SETool Lite still claims it's network locked, and I can't used my sim :( And all the process went smoothly, now I'm completely clueless why it wont work :( could it be a problem with the GDFS?

this is what the IDENTIFY log gives me:
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35988*********** CERT:RED
FLASH CID:52 COLOR:RED

Model:S500i
MAPP CXC article: R8BE001 prgCXC1123465_NAM_1_LY
MAPP CXC version: R8BE001
Language Package:HONG_KONG
CDA article: CDA12345678/123
CDA version: R2A
Default article: cxc1123328
Default version: R8BA024

Network LOCKED
Operator: 505-02

Elapsed:1 secs.

EDIT: Theres seems to have no custo pack for the R8BE version, I guess I absolutely need to use R8BA then?

[mba2431]

i test SIM_lock_remover patch generator for R4EC001 in k510, but it not work. anyone unlock file R4EC001 in k510?


excuse me for my bad english.

[simox]

Spirit:

SETool Lite still claims it's network locked,

Even if the phone is unlocked by patch, it will 'think' that the phone is locked, because it reads the locks info from GDFS but the patch alter the MAIN firmware. So it is absolutely a normal behavior.

and I can't used my sim

What is the error message do you get?

mba2431:

i test SIM_lock_remover patch generator for R4EC001 in k510, but it not work.

Please give us more details. SIM-lock Patch Generator is unable to generate the patch? What CID has your phone? Or SETool2 Lite gives you some error message?

[mba2431]

Please give us more details. SIM-lock Patch Generator is unable to generate the patch? What CID has your phone? Or SETool2 Lite gives you some error message?

SIM-lock Patch Generator generate patch. my CID is 49 red. setool2 give no error message.
but when i patch vkp, all 5 lock is locked.

[simox]

OK then, please post the log when you applied the patch. By the way, have you get some bytes mismatch or similar error message?

[mba2431]

OK then, please post the log when you applied the patch. By the way, have you get some bytes mismatch or similar error message?

this time that i patch vkp, my phone totally dead (pressing power bottom no action and phone no turn on)
my log:

Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35238********* CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok
 
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
 
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4EC001_CXC1250231_GENERIC_CO
Restore from:R4EC001_CXC1250231_GENERIC_CO
can't open file "E:\Users\AMINI\Documents\Downloads\Compressed\setool2lite\rest\R4EC001_CXC1250231_GENERIC_CO"
Starting to process VKP patch script: E:\Users\AMINI\Documents\Downloads\Compressed\K510\vkp\Remove_SIM_lock_K510_R4EC001.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44D80000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:47 secs.

my phone identify after patch:

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35238*********  CERT:RED
FLASH CID:49 COLOR:RED
IMEI MISMATCH ! GDFS IMEI:35579*********
 
Model:K510i
MAPP CXC article: R4EC001     prgCXC1250231_GENERIC_CO
MAPP CXC version: R4EC001
Language Package:S_ASIA_LEVAN
CDA article: CDA102295/7
CDA version: R2A
Default article: cxc1250246
Default version: R4EA031
 
Operator: 000-00
 
USERCODE:0000
 
RESTORATION FILE NOT PRESENT
"R4EC001_CXC1250231_GENERIC_CO"
YOU MUST PERFORM FULL FLASHING FOR PATCH UNLOCK
 
Elapsed:1 secs.

[simox]

Don't worry, your phone isn't really dead, and it can be easily revived ;) The problem is that there is no restoration file in [SeTool2Lite_folder]\rest folder for your MAIN. However you can make one with [SeTool2Lite_folder]\make_rest\ssw2rest.exe
Open a command prompt and invoke it as:

ssw2rest [path_to_MAIN]\K510_R4EC001_MAIN_GENERIC_CO_RED49.mbn 44140000

You will get a R4EC001_CXC1250231_GENERIC_CO file in [SeTool2Lite_folder]\make_rest\ folder. Copy it to [SeTool2Lite_folder]\rest folder. Reflash the MAIN firmware, then apply the unlock patch again. If everything goes well, the phone will work and will be unlocked too.

[mba2431]

Don't worry, your phone isn't really dead, and it can be easily revived ;) The problem is that there is no restoration file in [SeTool2Lite_folder]\rest folder for your MAIN. However you can make one with [SeTool2Lite_folder]\make_rest\ssw2rest.exe
Open a command prompt and invoke it as:

ssw2rest [path_to_MAIN]\K510_R4EC001_MAIN_GENERIC_CO_RED49.mbn 44140000

You will get a R4EC001_CXC1250231_GENERIC_CO file in [SeTool2Lite_folder]\make_rest\ folder. Copy it to [SeTool2Lite_folder]\rest folder. Reflash the MAIN firmware, then apply the unlock patch again. If everything goes well, the phone will work and will be unlocked too.

thanks mr simox. but when i flash main and patch vkp, my phone stuck in "PLEASE WAIT".
help me please...

[simox]

When a phone stuck at "PLEASE WAIT" screen, it is usually a GDFS problem. I hope you made a GDFS backup, before any flashing/patching attempt. Restore that GDFS backup(but DO NOT flash any other GDFS) and it should work.

By the way, and if you only flash the MAIN without applying the patch do you still get that "PLEASE WAIT" screen?

[mba2431]

i did backup my GDFS by phone xs but now i flash it by SETOOL get this error:

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35238********* CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok
 
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
 
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4EC001_CXC1250231_GENERIC_CO
Restore from:R4EC001_CXC1250231_GENERIC_CO
CSloader version:
SETOOL2 LITE  COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
loader GDFS startup: executed
Will write GDFS now.
will write 1091 variables
gdfsWrite err:11,block:1,unit:3CA
gdfsWrite err:11,block:3,unit:FAF
gdfsWrite err:11,block:3,unit:138F
gdfsWrite err:11,block:4,unit:1778
gdfsWrite err:11,block:4,unit:1B6D
gdfsWrite err:11,block:5,unit:1F54
gdfsWrite err:11,block:6,unit:2720
gdfsWrite err:11,block:6,unit:2726
done
Phone detached
Elapsed:132 secs.