Remove SIM-lock patch generator

[etnetop]

HI!

Simox! What wold be when you patch teh main.MBN file and after then flash the phone with the patched main.mbn??? so you don't need free sw to patch cid 50,51,52... Can this method work??

Well, to patch the MAIN firmware we need to know how to update the checksums in header. In CID49 (and lower CIDs) header there is one checksum byte per flash block. The formula is known, and there is a tool for this(GFlash). But in cid50,51,52 firmware files for each flash block there are 20 checksum bytes = huge protection, so I don't think that anyone will figure it out soon the algorithm...

In short currently is impossible...

I apologize for my bad english ..
I understand that for cid50,51,52 is impossible ..
But for db2020 cid49 is possible to patch the "main.mbn" and then flash the phone with the "pact main.mbn"?
It would be wonderfull!!!

very thanks!

[pankz]

Hi! Does it possible to add to this program the support of the patform DB2000,cid37?

[Afzaal™]

its just works on DB2010 CID49
not More


BR...

[kpm197]

hi, my main file is .MIN format- can i use this?

[simox]

hi, my main file is .MIN format- can i use this?

firmware with MIN extension? Or you wanted to write BIN? But why not try it?;)
If you downloaded the firmware from TopSony Download area, then I'm sure that it will work.

[simox]

pankz:
It is possible to support DB2000 platform, but not worth making it, because you need a service cable to apply the patch, and if you have a service cable you can do a GDFS(permanent) unlock with SEMCTool cracked for example.

Afzaal™: It works with DB2010/2012 CID49/50/51/52 but at the moment you can apply the generatred patches to DB2010 CID49 only...

Edit:
I relased a new version(1.1) with CID36 support. Check out the first post...

[danbwoi]

hi everyone, i must confess that it is quite possible, that my level of stupidity doesn't allow me to patch my w880 correctly. still, i would like to get this thing working and unlock it..

Is it necessary to hold the 2 Button the whole time while flashing it? (Step I - 6. according to simox tutorial) I am asking because nothing happens (i waited 30 minutes..), not with the phone nor with setool.

ok, i guess that i have found a possible troubleshoot: in the patch generator it said that CID is 52, now when i run setool it says 51. is it possible to patch 51's or do i have to convert it to 52? (if yes, how do i do this? :?)


___________________________________________

Ok, i crossread through some posts, and know now that i can't flash cid 51. so i tried to convert it to 52.

tried with DB2020_CID49_51_to_CID52.txt -> unsupported combination
tried with DB2020_CID49_51_to_CID52_OLD.txt ->


ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:51
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:- CERT:RED
FLASH CID:51 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
ldr_on_ldr hdr no ack (10)
CSloader uploading failed,exiting
Elapsed:7 secs.

[oko]

what about cid 53 cause ive got this

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35350002397199 CERT:RED
FLASH CID:53 COLOR:RED
Can't build loaders chain ;(
Elapsed:6 secs.

What are my options??

[ALeXANDR]

what about cid 53 cause ive got this

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35350002397199 CERT:RED
FLASH CID:53 COLOR:RED
Can't build loaders chain ;(
Elapsed:6 secs.

What are my options??

Your phone is CID53
the problem is that setool lite dont have support for CID 53

[pankz]

I have a service cable,thanks.