Remove SIM-lock patch generator

[etel]

Hi,

I am trying to reomve the SIMlock in my k800i.
I followed the instruction, but qamaker does not automatically generate a quick_access_xxx file.

can some body please help.
My firmware verion is K800_R1GB001_MAIN_GENERIC_WI_RED52.mbn
thanks in advance
Sl

[simox]

But I still do have the same question: How can I patch_unlock, WITHOUT using the quick_access stuff, no matter how long it takes.

Read my previous post ;)

I think that If I add MAIN, add unlock_vkp_script, tick Bypass DB2020... and click on FLASH it Should Work, SIMOX ??

Yes it will work in this way.

etel:

I followed the instruction, but qamaker does not automatically generate a quick_access_xxx file.

I need more information about this. It doesn't automatically generate??? Sorry, but this sentence has no sense...

[yurais]

Ok SImox, got it, and LAST Question: If I dont have the FIrmware and I do have the vkp_unlock_patch for the firmware running on the phone, can I ? Bypass db2020, add vkp_patch too MISC anf click FLASH ? would this work ? without the FIRMWARE FILE ?

it works this way for DB2010 or db2012, I unlocked a K310i this way, only with the vkp patch, not sure here on db2020 if it would work with bypassing.. you are the master, you say...

[etel]

HI,

I have copied .mbn file into qamker folder, and then i double clicked the qamaker.exe. then i pressed the enter.

according to the information on this thread, the above process should have generated a quick_access_xxxx.vpk file. but it did not make that file.

so please let me know how to generate the above .vpk file.
main firmware version is as follows,
K800_R1GB001_MAIN_GENERIC_WI_RED52.mbn.
thanks in advance
sl

[simox]

DB2020 phones cannot be unlocked without MAIN firmware. You must add the MAIN file, otherwise it will not work. The MAIN can be other version as well. No need to be the same version as your current version.

[yurais]

Really abouot the Version ?

that is really great news, but the oatch ?MUST be for the current phone's fw version no ?

[suchit]

will this work for my k850i?

[simox]

yurais:
Here is an example: suppose you have a K800 phone with R1ED001 version(K800_R1ED001_MAIN_GENERIC_WI_RED52.mbn). But you can use version R8BA024(K800_R8BA024_MAIN_GENERIC_WI_RED52.mbn) instead of R1ED001. So if you have a K800 phone then the MAIN firmware MUST BE a K800 MAIN, but the version may change. The patch version must be the same version as the MAIN what you added to SETool2 Lite. So if you add the K800_R8BA024_MAIN_GENERIC_WI_RED52.mbn to SETool2 Lite, then you need to make a patch from it. It is clear now? :)

etel:

and then i double clicked the qamaker.exe. then i pressed the enter.

No, no, no... You need to drop(Windows drag and drop operation) the mbn file to qamaker.exe, and a couple of seconds you get the quick access_XXX patch.

suchit:
At the moment no.

[etel]

Hi,
SImox, first all thanks for your kind help.


yes I did manage to create the quick_access_xxx file. I followed the steps,
and I got the " dialog pop-up, click "Yes" to remove the patch",
but afterwords I got a popup message saying patch is is different and whether i want to carry on.
I tried pressing yes.. and then it finished the process.

then i moved to step3, which was to write the script .
i generate the remove.. vkp file and follwed the step...
but this step failed.

i think this was because step procedure did not finis as explained in this thread.
please elp.
thanks in advance
sl

[yurais]

Yes, this last post cleared things a lot, I am sure many guys didnt know this, specially that the patch must be created off the MAIN file version which will be used for the operation.

People special care with this, have this clear !!! the patch must be from the version you will USE for the OPERATION on setool, and *NOT* from the version you have in the phone !

If unsure, Use always same MAIN file version than the version your phone is running.

Thank you Simox.

yurais:
Here is an example: suppose you have a K800 phone with R1ED001 version(K800_R1ED001_MAIN_GENERIC_WI_RED52.mbn). But you can use version R8BA024(K800_R8BA024_MAIN_GENERIC_WI_RED52.mbn) instead of R1ED001. So if you have a K800 phone then the MAIN firmware MUST BE a K800 MAIN, but the version may change. The patch version must be the same version as the MAIN what you added to SETool2 Lite. So if you add the K800_R8BA024_MAIN_GENERIC_WI_RED52.mbn to SETool2 Lite, then you need to make a patch from it. It is clear now? :)

etel:

No, no, no... You need to drop(Windows drag and drop operation) the mbn file to qamaker.exe, and a couple of seconds you get the quick access_XXX patch.

suchit:
At the moment no.