Remove SIM-lock patch generator

[Ch4sethe5u]

ok i will try that and let you know.

sorry still doesn't end up working.

=/

can't open file "C:\Documents and Settings\Owner\Desktop\PHONE\setool2lite_db2020\re st\R4DB005_CXC1250316_GENERIC_HN"

Is this important? ^ its in the log i put up earlier

[simox]

It is strange... After you applied the patch, and you try to turn on, the phone how reacts? Do you see a white blinking screen?

[Ch4sethe5u]

no nothing at all. i dont understand why its like this

just pure black screen. if you need anything that i can help you fix it or whatever ill put it up. like my flash logs if i can find any of that or whatever.

NR

[simox]

Please post the logs. I'm interested in that log when you applyed the patch. I think there is a problem in patching process...

[Ch4sethe5u]

ok

ill post it up in one second. i dont know where to find the log for setools so i will just make a screen shot or copy each line =]

ill find a way

[Ch4sethe5u]

here you go:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35235001392264 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4DB005_CXC1250316_GENERIC_HN
Restore from:R4DB005_CXC1250316_GENERIC_HN
can't open file "C:\Documents and Settings\Owner\Desktop\PHONE\setool2lite_db2020\re st\R4DB005_CXC1250316_GENERIC_HN"
Starting to process VKP patch script: C:\Documents and Settings\Owner\Desktop\SIMLockPatchGen\vkp\Remove_ SIM_lock_W810_R4DB005.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44E40000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:44 secs.

this is exactly how it came out

[ts013]

Unzip the archive in the attachment and copy it into the "rest" folder in SE Tool lite. Have another try afterwards.

[Ch4sethe5u]

That did it! it worked. what im wondering now though is why it was not there in the first place... What was that file anyways?

Thank you for the help =]
Justme i saw you on se-nse.com and now here.

Thanks

[ts013]

The rest file is a little part of the MAIN which gets destroyed by the breakin.
Your phone didn't start up because of the messed up main.
The rest file replaces the 4blocks that get destroyed. If you flash the whole main in order to get your phone working the patch is obviously removed ;)

SE Tool lite comes with many restfiles but adding them for every firmware version would cause a huuuuuge download file.

Thank you for the help =]
Justme i saw you on se-nse.com and now here.

Well, same goes for me: I answered your questions on se-nse, now here ;)
You're wellcome

[Ch4sethe5u]

I dont know if this is a dumb question or not
and thanks again =]

but how do you create a rest file. because my rest folder only has that rest file you gave me and a program called ssw2rest.