Remove SIM-lock patch generator

[simox]

i have a sony ericsson v630i (vodafone),and i want to unlock it. fireware R1EDOO1, DB2020, CID 49.

First you need to update your EROM CID to 52, to be able to apply the unlock patch. For this operation you need XS++ v3.1. Run XS++, click on Connect button, now press the 'C' key on phone and connect the cable. When XS++ ask you to upgrade the CID, then press Yes.

Before you can do anything, you need to install the USB Flash Driver: USB Flash Driver Installation - Guide

When any tutorial or program says to connect the phone it means:
1. Turn off the phone(if it is turned on)
2. Remove the battery, and wait about 5 seconds(remove the SIM and memory card, if you do not removed them already).
3. Put the battery back, but DO NOT turn on the phone.
4. Now you click on button which the tutorial/program say.
5. Press and hold the 'C' key on phone, then connect the cable. Wait until you see some progress in status window(in left side of XS++ or SETool lite).
6. You can release the 'C' key now.

MAIN firmware: the file with *.mbn extension. You NEED to download another MAIN firmware with CID52, e.g V630_R1JE001_MAIN_VODAFONE_MW_RED52. Instead of R1JE001 can be anything else, but this is the latest firmware...

when i go to WE it opens my documents, and i don't understand what file are you reffering to.

I'm referring to MAIN firmware what you need to unpack it somewhere(the best if you unpack it to path_to_SETool_lite_folder\qamaker folder).

Hope you uderstand it...

zirkie:
Go to >*<<*< menu then Serivce info-> SIM lock. All locks should be unlocked. Do not try whith <**< menu because you will get randomly locked/unlocked locks(this is a 'normal' behaviour).

[xiii47]

i cannot seem to start setool2 lite. everytime i click the exe it gives me an internal exception, i just use the exe in the "PatchWise.bak" folder. everything seems fine except even after i updated to 1.11 it still says 1.10 and after i press no to apply the patcht he program just closes abruptly. an help?

[simox]

Try this: SETool2_Lite_v1.11.zip - 4shared

[xiii47]

thnks. i tried it on another computer and it worked

[del12]

please simox can you tell me if i can unlock my k850i with your sim patcher
thankyou
del

[geokilla]

Just try it yourself del.

I don't think it'll work since K850i is DB3150, and on the first page it doesn't state that it'll work with DB3150 phones. This patch only works for phones with DB2020, 2010, and 2000.

[simox]

It will NOT work with K850 because (like geokilla just said) it is a DB3150 phone, and it is not supported by my tool. Why? Because you cannot even flash this platform for free, not to mention the patching...

[bumer_m3]

Thank you simox!!
today i have unlocked my w880i, and it works now with all sim cards ;-)
it is a great soft!!!

[Ch4sethe5u]

for some reason my W810i will not turn on anymore. I can still reflash the firmware and it will turn on again but when i apply the patch through setoolite2 v1.11 in misc file it does not work.

this is the log from the patcher:
Selected firmware: C:\Documents and Settings\Owner\Desktop\PHONE\Firmwares\W810
_R4DB005_MAIN_GENERIC_HN_CID49.mbn
Analyzing firmware...
BABE header found and seems ok.
Flash Platform: DB2010
Flash CID: 49
Flash Color: Red
Base address: 44140000
Generating raw firmware...
Firmware generated.
Searching for required addresses...
Addresses found.
Generating vkp patch...
"C:\Documents and Settings\Owner\Desktop\SIMLockPatchGen\vkp\Remove_ SIM_lock_W810
_R4DB005.vkp" patch file created.
FINISHED.

Making the patch was fine.

this is the main and FS im using:
W810_R4DB005_FS_AMERICA_2_RED49.fbn
W810_R4DB005_MAIN_GENERIC_HN_CID49.mbn

let me know what im doing wrong.

[simox]

It is strange... After you applied the patch, and you try to turn on, the phone how reacts? Do you see a white blinking screen?