Remove SIM-lock patch generator

[stamenco]

BIG THANKS to simox, i have unlocked my K800i

[sprangga]

Every time I try to apply the Simox unlock patch I receive the following error.

New block #0000 added: $45100000
Blocks selected OK. Reading blocks: 1
Block @ $45100000 read error. Have only: 00000000 bytes

or

Blocks selected OK. Reading blocks: 2
Block @ $44140000 read error. Have only: 00000000 bytes


Can you assist so that I can remove the Network lock?

[onlyone]

did you bypass-ed db2020 security?
guesss not, so that is your problem. use setool 1.10 at least (or 1.11 if you want more than one patch)

[simox]

Do you use SETool2 Lite v1.11? The phone's EROM CID is 52? Do you follow one of DB2020 patching tutorials?

[sprangga]

I read over the tutorials and the patch gave the following:
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\SOny Ericsson W610\SeTool 2 Lite 1.11_ with_video_tutorials\setool2lite_db2020\qamaker\qu ick_access_W610_R6BC002.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45A80000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:3281 secs.

But when I insert another carrier sim card i get "Insert correct Sim card"

hmm?? any ideas

[interferej]

meybe you(sprangga) trying to apply wrong patch...It is for your firmware which you flashing via setool??

[simox]

But when I insert another carrier sim card i get "Insert correct Sim card"

hmm?? any ideas

You need to apply the unlock patch as well. Here is how to do:

ok, so you put the quick access. Now you need to put the unlock patch generated by my tool:
First generate an unlock patch. Run my tool, select the MAIN firmware(K800_R8BA024_MAIN_GENERIC_WI _RED52.mbn) and press Make patch button.
In SETool2 Lite select your phone type, tick 'Use "quick access" patch' checkbox, select the generated unlock patch(Remove_SIM_lock_K800_R8BA024.vkp) in Misc files and click Write SCRIPT button.

[sprangga]

Yes I am tryiing to unlock my phone with my firmware! I cannot see it being the wrong patch as i dragged the firmware main over the qmaker file and it generated the vkp file.

hmm

ok Simox, now leaving work, will try it later and post the results! thanks for the help and patience with me so far!

[simox]

You didn't understood me. The qameker WILL NOT unlock your phone. It is for speed up the further patching. It is all ok what you did, but you need to do the following as well:

1.) First generate an unlock patch. Download my tool from first post of this thread(use the latest version 2.1). Run my tool, select the MAIN firmware and press Make patch button.
2.) In SETool2 Lite select your phone type, tick 'Use "quick access" patch' checkbox, select the generated unlock patch(Remove_SIM_lock_XXX_XXXXXXX.vkp) in Misc files and click Write SCRIPT button.

If you do this, your phone will be unlocked...

[sprangga]

Success AT LAST!!
Thanks SIMOX ! thanks so much! I finally understand the entire process end to end!

And I have the other carrier sim working in the w610!