Remove SIM-lock patch generator

[beachee99]

thanks this helped a bit, gotta check if it can fully work for what i need.

[bildos]

Now i have:

welcome to setool2 lite edition v 1.07
supported DB2010/DB2012 CID49/50/51, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:200D
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35657600694488 CERT:RED
FLASH CID:49 COLOR:RED
Elapsed:10 secs.

My phone is not able accept any sim card :(

Any ideas ?

[99smiffy99]

i have flashed my k750i to a w800i and
then follow all instructions to unlock
but when i do i get the error message:
"configuration error. Please contact your
network operator or service centre"

please help:confused:

[yurais]

If you use setool lite, you must write a custom pack for phone to get finalized properly.

in the scripts folder there is a file named test.zip, you can use this one for finalize your phone.

regards

i have flashed my k750i to a w800i and
then follow all instructions to unlock
but when i do i get the error message:
"configuration error. Please contact your
network operator or service centre"

please help:confused:

[krazy1957]

i have flashed my k750i to a w800i and
then follow all instructions to unlock
but when i do i get the error message:
"configuration error. Please contact your
network operator or service centre"

please help:confused:

I flashed my K800i, and unlocked it.
What I did was to custom change the CDA code when I flashed the fs file, or ensure you have choosen the right region fs file.

I used: Simlockpatch gen v2.1, and XS++ v3.2 plus setool2lite v1.10

Maybe this thread may help!
http://www.topsony.com/forum/cmps_in...?page=CDA_K800

[SeaMonkey]

@Fmyfriend

When you hit connect in XS++,press C button on phone and than connect USB cable - if that don't work - try to change USB port and clean conector on phone - if that don't work try to reinstall flash drivers


@99smiffy99

It's doesn't matter what tool you use - you must finalize flashing with CUSTPACK, but CUSTPACK must be same region like FS (so if you use FS - EUROPE_2 - than CUSTPACK must be for EUROPE_2). Just look here XS++ 3.1 Guide-Flashing, Customizing, Recovering - Top Sony Forums SECTION 4

[HX_unbanne]

Hm, thanks for so accurate manual ;)

Still - I have situation where mobile phone has bought on leasing and its close to the end of 2-yer payment, so I wondered - is it safe to do this patching? Will it break any agreements to telephone company or service provider?

Oh yes, Please do something with that rest thing - First time i did that file creation, I was confused ebcause I could find created file in make_rest folder, but it already was in rest folder ... the list is huge. Maybe you could set some kind of attributes to focus to that new rest file? ;)

Anyway - thanks for your initiative! Good luck in further releases!

[alex-r]

hey, trying to unlock a friends w810. not sure how to match up the firmware versions and because it isnt mine im being extra careful

22:18:27| Baseband ID: 8040
22:18:27| Protocol Version: 3.1
22:18:27|
22:18:27| Sending db2010_cid00_prodid_p3l.bin...
22:18:27| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
22:18:27| This is a PRODUCTION_ID loader
22:18:27| Activating GDFS...
22:18:28| Phone name detected!
22:18:28|
22:18:28| Profiling SEMC phone...
22:18:28| Platform: DB2010
22:18:28| OTP CID: 49
22:18:28| EROM CID: 49
22:18:28| EROM Color: Red
22:18:28| IMEI: 35906400xxxxxx
22:18:28| Phone ID: W810
22:18:28| Region: ORANGE_GEN
22:18:28| CDA: CDA102494/51 R12A
22:18:28| Firmware Version: R4DB005
22:18:28| EROM: n/a
22:18:28| Ready for operation!


cheers!

[never_sane]

Help please - could not find security check box as decribed - am useing setool 1.11 - getting this error -

Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45C80000
Blocks selected OK. Reading blocks: 2
Block @ $44140000 read error. Have only: 00000000 bytes
Elapsed:356 secs.

Is this due to check box and if so where is it?

[riders4sia]

Help please - could not find security check box as decribed - am useing setool 1.11 - getting this error -

Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45C80000
Blocks selected OK. Reading blocks: 2
Block @ $44140000 read error. Have only: 00000000 bytes
Elapsed:356 secs.

Is this due to check box and if so where is it?

you need to apply quick access first,
Read here : Flash your phone and How to apply or remove patch using SETool 2 Lite - Top Sony Forums