Remove SIM-lock patch generator

[gurinder]

i m getting error while patching w200i with version r4a

check this sir and tell me where i m wrong?

any good patch for w200i


log from setool2lite 1.11


Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35426901169312 CERT:RED
LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\National Computers\Desktop\W200_R4JA011_MAIN_GENERIC_ME_RED 52\W200_R4JA011_MAIN_GENERIC_ME_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:6360
Will flash 318 blocks...
SSW loading returns:0
writing C:\Documents and Settings\National Computers\Desktop\W200_R4JA011_FS_CENT_EUROPE_RED5 2\W200_R4JA011_FS_CENT_EUROPE_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:2500
Will flash 125 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: G:\kaku from 10 month\sony ericcson\SIMLockPatchGen_v2.1\SIMLockPatchGen\vkp\ Remove_SIM_lock_W200_R4JA011.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44CC0000
Blocks selected OK. Reading blocks: 1
Block @ $44CC0000 read error. Have only: 00000000 bytes
Elapsed:242 secs.
Going to execute VKP script....
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:3542690xxxxxxx CERT:RED
LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
Flash ID check:897E
Flash props sent ok
Starting to process VKP patch script: G:\kaku from 10 month\sony ericcson\SIMLockPatchGen_v2.1\SIMLockPatchGen\vkp\ Remove_SIM_lock_W200_R4JA011.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44CC0000
Blocks selected OK. Reading blocks: 1
Block @ $44CC0000 read error. Have only: 00000000 bytes
Elapsed:12 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:2 secs.
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35426901xxxxxxx CERT:RED
LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\National Computers\Desktop\W200_R4JA011_MAIN_GENERIC_ME_RED 52\W200_R4JA011_MAIN_GENERIC_ME_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:6360
Will flash 318 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\National Computers\Desktop\Unlock_Patch_DB2010_DB2012_DB202 0\W200_R4JA011_RED52.vkp
VKP script loaded OK. Lines: 5
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44CC0000
Blocks selected OK. Reading blocks: 1
Block @ $44CC0000 read error. Have only: 00000000 bytes
Elapsed:176 secs.

[seunlock]

i m getting error while patching w200i with version r4a

check this sir and tell me where i m wrong?

any good patch for w200i


log from setool2lite 1.11


Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35426901169312 CERT:RED
LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\National Computers\Desktop\W200_R4JA011_MAIN_GENERIC_ME_RED 52\W200_R4JA011_MAIN_GENERIC_ME_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:6360
Will flash 318 blocks...
SSW loading returns:0
writing C:\Documents and Settings\National Computers\Desktop\W200_R4JA011_FS_CENT_EUROPE_RED5 2\W200_R4JA011_FS_CENT_EUROPE_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:2500
Will flash 125 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: G:\kaku from 10 month\sony ericcson\SIMLockPatchGen_v2.1\SIMLockPatchGen\vkp\ Remove_SIM_lock_W200_R4JA011.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44CC0000
Blocks selected OK. Reading blocks: 1
Block @ $44CC0000 read error. Have only: 00000000 bytes
Elapsed:242 secs.
Going to execute VKP script....
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:3542690xxxxxxx CERT:RED
LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
Flash ID check:897E
Flash props sent ok
Starting to process VKP patch script: G:\kaku from 10 month\sony ericcson\SIMLockPatchGen_v2.1\SIMLockPatchGen\vkp\ Remove_SIM_lock_W200_R4JA011.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44CC0000
Blocks selected OK. Reading blocks: 1
Block @ $44CC0000 read error. Have only: 00000000 bytes
Elapsed:12 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:2 secs.
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35426901xxxxxxx CERT:RED
LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\National Computers\Desktop\W200_R4JA011_MAIN_GENERIC_ME_RED 52\W200_R4JA011_MAIN_GENERIC_ME_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:6360
Will flash 318 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\National Computers\Desktop\Unlock_Patch_DB2010_DB2012_DB202 0\W200_R4JA011_RED52.vkp
VKP script loaded OK. Lines: 5
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44CC0000
Blocks selected OK. Reading blocks: 1
Block @ $44CC0000 read error. Have only: 00000000 bytes
Elapsed:176 secs.

setool2 lite only supports DB2012 CID49

[gurinder]

setool2 lite only supports DB2012 CID49

i m using setool2lite v1.11

then i m getting this message,if this software supports only cid49 then why other people saying that it supports db2020 also. anyother solution plz..................

[simox]

i m using setool2lite v1.11

then i m getting this message,if this software supports only cid49 then why other people saying that it supports db2020 also. anyother solution plz..................

SETool2 Lite v1.10 and v1.11 can patch DB2010 CID49 and DB2020 CID52 phones. Older versions can patch DB2010 CID49 ony...

By the way you cannot patch for free W200 phones because they are DB2012.

[sockbr]

i m using setool2lite v1.11

then i m getting this message,if this software supports only cid49 then why other people saying that it supports db2020 also. anyother solution plz..................

I got the same problem, we'll need to wait and pray to the guys solve a problem with DB2012 and CID 52 on next new release of setool2lite.

so doesn't have any free solution for our problem.

[gurinder]

then my phone showing db2012, means this is not unlockable

can u talk me on yahoo messenger ???????

[simox]

xulos: I checked your problem. I used k550_R1JD001_MAIN_GENERIC_LI_RED52.mbn and it works just fine. So I have no idea what is wrong... Do you use the latest version v2.1?

Here is the patch:

;k550 SW-R1JD001
;Remove SIM-Lock
;(c) IronMaster
;(p) simox SIM_lock_remover patch generator v2.1
+44140000
4DBF68: 30B5041C00231A1C111C1C20A4F4 F0B505213A22ABF421FA0020F0BD

[xulos]

xulos: I checked your problem. I used k550_R1JD001_MAIN_GENERIC_LI_RED52.mbn and it works just fine. So I have no idea what is wrong... Do you use the latest version v2.1?

Here is the patch:

;k550 SW-R1JD001
;Remove SIM-Lock
;(c) IronMaster
;(p) simox SIM_lock_remover patch generator v2.1
+44140000
4DBF68: 30B5041C00231A1C111C1C20A4F4 F0B505213A22ABF421FA0020F0BD

man my big apologise... i used 2.0 insetad of 2.1 version.. big thx

[kuolas]

I've tested with a AT&T SonyEricsson W580i and it's works with 2.0. But I lost the flash menues.

[vojar]

simox see if I will do it corectly!
Make Backup of GDFS with PhoneXS++ v 3.0 beta
open the program, click on conect button, then click on GDFS and after click on backup GDFS!!

Appling the patch on Setool2lite v1.1
open the programa, select the model k550i, mark "bypass DB2020 security", on misc file put the vkp patch who was generated with your tool and then I should click on flash or on write script? to send it to the phone!! (I dont wanna send the MAIN firmware to the phone, just the patch)
tanks for last answer!!!