Remove SIM-lock patch generator

[simox]

Th3z3D: It is my tool's bug. I haven't tested with DB2020 CID49 firmwares at all, because we cannot patch them for free. If you want to apply the unlock patch, you need to update the phone's CID to 52. Is there always a chance to loose your settings etc, but should not happen if you update the CID. You should always back-up your user data(contact list, pictures, ringtones, etc.) and then your GDFS.

khli2001: Please can you be more specific? My patch generatot isn't works, or you don't have the R6BC002 hong kong 52 firmware?

manjak: I'm glad that you have found a way to apply the patch. Enjoy the freedom :)

And guys, excuse me if I missed someone. There are so many questions...

[khli2001]

sorry i was meaning the setool lite 1.11 not working on me
your tool just working fine
i got the patch is well
but i just cant apply the patch with setool 1.11
can i use setool 1.10 to apply the patch?
because i am working fine with 1.10

[simox]

sorry i was meaning the setool lite 1.11 not working on me
your tool just working fine
i got the patch is well
but i just cant apply the patch with setool 1.11
can i use setool 1.10 to apply the patch?
because i am working fine with 1.10

You can apply the patch with v1.10 too, but 1.11 would be better... You can try jdflasher too.

[xulos]

k550_R1JD001 cid52 need this patch pls

[khli2001]

k550_R1JD001 cid52 need this patch pls

;K550 SW-R1JD001
;Remove SIM-Lock
;(c) IronMaster
;(p) simox SIM_lock_remover patch generator v2.1
+44140000
4DBFB0: 30B5041C00231A1C111C1C20A4F4 F0B505213A22ABF407FA0020F0BD

i am not sure if this work with your or not
because this is from a hong kong fimeware

i dont know its that the same or diffenert with other language fimeware or not

[IsAaCCéSaR]

Tested and works.

;W580 SW-R6BC002
;Remove SIM-Lock
;(c) IronMaster
;(p) simox SIM_lock_remover patch generator v2.1
+44140000
4E8118: 30B5041C00231A1C111C1C2095F4 F0B505213A229CF4F1FA0020F0BD

[golddickaz]

Tryed with a w580i as well, but couldnt start the phone after Flash
Used simox SIM_lock_remover patch generator v2.1 with this W580_R6BC002_MAIN_GENERIC_LA_RED52 to make patch. Flash went smooth but....

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
Going to execute VKP script....
Starting to process VKP patch script: F:\_Upload\SIMLockPatchGen\vkp\Remove_SIM_lock_W58 0_R6BC002.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:377 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:*********** CERT:RED
FLASH CID:52 COLOR:RED
set_gdfs_props failed, exiting
Elapsed:10 secs.

something went Wrong...but what ??? can some help how to do it right

[IsAaCCéSaR]

SEtool2 Lite v1.11, select "By Pass DB2020 Security," after clicke on "ADD" and select the Firmware, the same as vc used to generate the patch. Clicke on "Misc Files", select the patch vkp created by SIM Lock PatchGen and clicke in "Flash"

[golddickaz]

Did the Falsh again on my w580i, this i could start the phone again, but its still Locked..damn
Color: Red ; OTP CID: 51
EROM CID: 52
Phone Model: W580i
Operator: EUROPE_4
CDA: CDA102426/12 R2A
Phone Firmware: R6BC002
Firmware CXC: R6BC002_prgCXC1123362_GENERIC_LA
Firmware supported for patch unlocking.
MCC+MNC: 238-01 - USIM
NCK: - Unlocked - 5
NSCK: - Locked - 5
SPCK: - Unlocked - 5
CCK: - Unlocked - 5
PCK: - Unlocked - 5
ESL: - Unlocked - 5
Phone Code: - Empty
Phone Code lock state: - Unlocked

Log from Setool..

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing F:\_Upload\_MOBIL\_Flash_Files\W580_R6BC002_MAIN_G ENERIC_LA_RED52\W580_R6BC002_MAIN_GENERIC_LA_RED52 .mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: F:\_Upload\SIMLockPatchGen\vkp\Remove_SIM_lock_W58 0_R6BC002.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:679 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:*********** CERT:RED
FLASH CID:52 COLOR:RED

Model:W580i
Brand:Generic
MAPP CXC article: R6BC002 prgCXC1123362_GENERIC_LA
MAPP CXC version: R6BC002
Language Package:EUROPE_4
CDA article: CDA102426/12
CDA version: R2A
Default article: cxc1123364
Default version: R6BC002

Network subset LOCKED
Operator: MULTIPLE

Elapsed:9 secs.


Damn... any suggestions

[xulos]

k550_R1JD001 cid52 need this patch simox .:) thx i got this message :
Entry point cannot be found. Probably it is not a MAIN firmware, but if you are sure
that it is, then please contact the author.